Bids Are Invited For Acquisition Of Fire-Fighting And Rescue Equipment For The Military Fire Department Of The Municipality Of Morro Da Fumça.

1- Synthetic Foam Generator Liquid (Lge), For Use In Conjunction With The Foam Generator Kit. 2- It Must Be Of The Sintex Afff/Arc Type, And Must Have A Concentration Of 3% To 6%, Multipurpose, Specific For Fighting Hydrocarbon Fires ( Ex.: Naphtha, Gasoline, Kerosene, Diesel Oil, Etc.) And Polar Solvents (Ex.: Methyl Alcohol, Ethyl Alcohol, Acetone, Isopropanol, Etc). Possibility Of Use With Fresh Water, Sea Water And/Ousalobra.3- Must Be Supplied In Gallons Of 20 Liter.4- Must Have Abnt Certification Nbr15511:2008 Or Later For Type 5, Class Hc - Fire Extinguishing In Hydrocarbons And Classar - Fire Extinguishing In Polar Solvents.5- The Winning Bidder Must Provide Catalog Of The Product With As Much Information As Possible Before Final Delivery To Verify Compliance With Specifications., Portable Foam Generator With Reservoir Made Of Polyethylene, Reservoir Capacity Of Lge 10 Liters, With 1.1/2 Torz Type Quick Coupling Connection, Flow Of 45 Lpm @ 100 Psi (7.0Kgf/Cm²), Empty Weight 5.2Kg And Full 13.6Kg, Dimensions 345 It Can Be Used In Concentrations Of 0.1%, 0.5% And 1% In Class A, In Concentrations Of 1%, 3%, 6%, 1%-3% Arc, 3%-3% Arc And 3%- 6% Arc It Must Produce Low And Medium Expansion Foam And Have A Solid Jet Nozzle For Fighting Class A Fires. Manual Eductor Nozzle With Adjustable Flow (Quadracup), Special For Applying Water Or Low Expansion Foam. Selectable Flow Nozzle Adjusted To 30, 60, 95 And 125 Gpm Apsi (110, 230, 360 And 470 L/Min @ 7 Bar), Manufactured In Light Aluminum Alloy And Anodized Finish, Equipped With A Rubber-Coated Aluminum Handle, Opening Lever And Closing The Flow Through A Stainless Steel Ball Valve, Flush Button For Cleaning Impurities Originating From The Water System, Allows The Formation Of Jets In The Form Of Mist, Half Mist And Solid Jet, The Nozzle Must Have A Coupling For A 1 ½ Diameter Fire-Fighting Hose. Type Storz Type 52-C, Integrated To The Nozzle Body, Made From The Same Material As The Nozzle Body, Or Similar. Brass Storz Adapter Will Not Be Accepted. Working Pressure: 7.0 Kgf/Cm², With Fm Certification, Production With Iso9000 Certification: 2000, Conformity With Nfpa 1964, 1998 Edition And Its Evolution 2003 Edition., Fire Hoses, With Internal Diameter Of 2½, For Use In Control Service Fire Extinguishing, According To Technical Specifications: - Simple Textile Reinforcement Made Of 100% High Tenacity Polyester Yarn, External Coating In Pvc + Nitrile Rubber, In Red Color And Internal Synthetic Rubber Tube, In Diameters Of 2½ (Approximately 63Mm) Working Pressure Of 14 Kgf/ Cm², Test Pressure Of 28 Kgf/Cm2, Minimum Bursting Pressure Of 42 Kgf/Cm², Abrasion Resistance Above 500 Cycles, Classified As Type4 According To Standard Nbr 11861:98 Or Standard That Replaces It, Intended For The Industrial Area, Where A Greater Abrasion Resistance, Tied, At Both Ends, With Quick Coupling Unions, In Brass, Type 65-B (Paradiameter Of 63Mm) According To Nbr 14349 Or Norm That Replaces It, Mark Certificate Of Conformity Abnt N° 40.0007/99, As Hoses Must Be Supplied In Runs Of 20 Meters In Length, Fire Hose, With An Internal Diameter Of 1½, As Per Technical Specification: Simple Textile Reinforcement Made 100% 1,205.00 6,025,