Bids Are Invited For Hiring A Specialized Company To Rent Tents (With Assembly And Disassembly), For Vaccination Campaigns And Other Actions Of Health Surveillance And The Municipal Health Department, Through The Price Registration System (Srp), Through The Municipal Health Department, With Non-Linked Tax Resources, As Described And Specified In This Notice And Its Annexes.

Lot 1 - Lightweight Partitions Supply Of Materials And Labor For Assembly And Rental Of Complete Structure Of Aluminum Uprights And Crossbeams And Lightweight Partitions. These Must Be Made Of White Ts Panels At Least 2.20 Meters High. Location And Modulation Must Be Defined By The Requesting Municipal Secretariat, In Accordance With Current Technical Standards. Observations Pertinent To The Items Described Above - Technical Specifications For Lightweight Partitions, The Following Technical Specifications Must Be Observed For All Types Of Lightweight Partitions Described Above. :, Construction Conditions: Construction Conditions, The Implementation Of Lightweight Partitions Must Meet The Requirements Of The Specific Request. In Any Situation, The Location Must Be Previously Evaluated And Permitted For Implementation. They Must Be Carried Out By Qualified Labor, Level, Plumb And Strictly In Accordance With The Specifications Of The Material Manufacturer. Of The Same, With Piping For Drainage And Reservoir For Wastewater., Lot 1 - Wooden Deck Supply Of Materials And Labor For Assembly And Rental Of Deck/Flooring With Plywood Sheets In Wood With A Minimum Thickness Of 18Mm (Eighteen Millimeters) ) On Solid Wood Structure, In A Location To Be Defined By The Requesting Municipal Secretariat, In Accordance With Current Technical Standards. Observations Pertinent To The Items Described Above - Technical Specifications For Tables, For All Types Of Tables Described Above The Following Technical Specifications: , Structure And Modulation: The Structure Must Have A Regular, Fixed, Stable, Leveled, Orthogonal Surface And Finished In Wooden Plywood Sheets. It Must Be Executed With Gauged Wooden Rafters, Free From Flaws Or Cut Irregularities. They Must Have A Regular Section Of 5 Cm X 5 Cm, Or 2 (Two Inches). The Distance Between Each Piece Cannot Exceed 0.60 Meters (Sixty Centimeters) Resulting In A Measure Where The Covering Joints Are Supported, Lot 1 - Coated Wooden Board Supply Of Materials And Labor For Assembly And Rental Of Board/Floor With Wooden Plywood Sheets With A Minimum Thickness Of 18 Mm, (Eighteen Millimeters) On A Solid Wood Structure And Covered With Carpet In Gray And/Or Red Colors, In Accordance With Current Technical Standards., Observations Pertinent To The Items Described Above - Specifications Techniques For Tables, Orthogonal And Finished In Wooden Plywood Sheets. It Must Be Made With Gauged Wooden Rafters, 60 Meters (Sixty Cents, Lot 1 - Pyramidal Tent And/Or “Witch Hat” Dimensions 10X10 With Approximate Dimensions Of 10.00 Side Closures In White Canvas, Equipped With Electrical Installation For Using A Computer With Internet Access., 10/02/2024, Lot 1 - Pyramidal Tent And/Or “Witchs Hat” Dimensions Approx. 5.00 = 25M² With Approximate Dimensions Of 5, Totaling 25M² Equipped With Cover And Side Closures In White Canvas