Bids Are Invited For Acquisition Of “Mat-Type Equipment, For Separating And Lifting Recyclable Materials”, Intended For Equipping The Municipal Urban Cleaning System, Especially Recyclable Materials In This Municipality Of Mandaguaçu

Waste Lifting Belt: Minimum Length Of 6,000 Mm And Maximum Of 10,000 Mm And Width Of 1380 Mm; With Fixed Type Flights And Hopper With Metallic Structure Lining The Gap At The Bottom Of The Conveyor. Monoblock Type Structure Built With Steel Plates. Flat Base In Sheet Steel For Sliding The Belt. Useful Canvas Width 1000Mm And Flight Width 800Mm And Minimum Height 50Mm. Equipped With A Minimum 3 Hp Gearbox, Controlled Via A Frequency Inverter And Using A Potentiometer To Regulate Its Speed From 0 To 8 M/M. Canvas With Flights And Pressed Clamp Splice For Lifting System And Side Seals. Electrostatic Painting. The Lifting Belt Must Be Compatible And Installed/Coupled With The Flat Separation Belt With Dimensions Of: 1010Mm Height X 1380Mm Width X 10500Mm Length, Through A Feed Funnel, Uniting The Two Equipment. With Trigger System For Emergency Shutdown For Equipment Operators. New Equipment With 12 Month Warranty After Installation. Waste Lifting Conveyor: Minimum Length Of 6,000 Mm And Maximum Of 10,000 Mm And 1380 Mm Width; With Fixed Type Flights And Hopper With Metallic Structure Lining The Gap At The Bottom Of The Conveyor. Monoblock Type Structure Built With Steel Plates. Flat Base In Sheet Steel For Belt Sliding. Usable Canvas Width 1000Mm And Flight Width 800Mm And Minimum Height 50Mm. Equipped With A Minimum 3 Hp Gearbox, Controlled Via A Frequency Inverter And Using A Potentiometer To Regulate Its Speed From 0 To 8 M/M. Canvas With Flights And Pressed Clamp Splice For Lifting System And Side Seals. Electrostatic Painting. The Lifting Mat Must Be Compatible And Installed/Coupled With The Flat Separation Mat With Dimensions Of: 1010Mm Height X 1380Mm Width X 10500Mm Length, Uniting The Two Equipment. With Drive System For Emergency Shutdown Of Equipment Operators, Waste Separation Belt: Minimum Size Of 10500 Mm, Equipment With Metallic Structure With Anti-Corrosion Coating, Equipped With Electric Gear Motor Of Minimum 1Kw Product Dimensions: 1010Mm Height X 1380Mm Width X 10500Mm Length Being 1000 Rubber Side Protection To Prevent The Accumulation Of Residue On The Conveyor Belt. Flat Base In Sheet Steel For Belt Sliding. Conveyor Belt Speed ​​Variation System, Through Frequency Inverter And Potentiometer Controlling Belt Advance, Determining Speed ​​For Operation From 0 To 8 Meters Per Minute. Bearings With Adjustment System For Conveyor Belt Alignment. Machined And Galvanized Traction Rollers. Electrostatic Painting. The Equipment Must Be Compatible And Installed On A Waste Lifting Conveyor With A Width Of 13800 Mm. New Equipment With 12 Month Warranty After Installation. Waste Separation Belt: Minimum Size Of 10500 Mm, Through Frequency Inverter And Potentiometer Controlling The Advancement Of The Belt, Determining The Speed ​​For Operation From 0 To 8 Meters Per Minute. Bearings With Adjustment System For Conveyor Belt Alignment. Machined And Galvanized Traction Rollers. Electrostatic Painting. The Equipment Must Be Compatible And Installed On A Waste Lifting Conveyor With A Width Of 13800 Mm. New Equipment With