Request For Quotation Purchase Of Goods For Practical Busy

Plattenreiniger K3 Intensive Cleaner For Offset Plates With A Gentle Effect. Cleaning Of The Surface Of Printing Forms From Paint And Activation Of Blank Elements Of The Printing Form. Technical Characteristics: Substance: Pasty. Density: 0.98 G/Cm3. Color: White. Smell: Characteristic. Ionization: 2.2-2.5 Ph., Concentrated Moisturizing Solution For Letterpress Printing Machines. Preparation Of Moistening Solution For Small-Format Sheetfed Offset Printing Machines With A Direct Film Moistening System: Dds, Varnkompac, Aquatron, Etc. Technical Characteristics: Substance: Liquid, Density: 1.09 G/Cm3 Color: Transparent, Yellowish Smell: Characteristic Ionization: 4.8 Ph (Concentrate)., Banner 300G Matte 3.2Mx50m. Knitting Threads 200*300., Mp-S Correction Gel For Negative Correction Of Positive Offset Plates. To Remove Printed Elements From The Surface Of Developed Positive Analog And Ctp Printed Forms. It Is Intended For The Assembly And Copying Section. In Jars Of 100 Ml., Cmyk Triad Offset Paint. Triad Offset Paint. Universal, Applicable For Coated And Non-Coated Grades Of Paper. Provides Stable High-Speed Printing; Quick Setup, Remarkable Dot Reproduction, Accelerated Film Formation. Good Gloss, High Abrasion Resistance. Certified By Sgs (Rohs, En71, Astm Standard); -Complies With Gost Iso 12647-2:2013. Set Of 4 Colors/2.5 Kg., Bottles For Washing The Car. Plastic Bottle For Washing Equipment, With A Curved Spout, Graduated Bottle For Washing, Laboratory Squeeze Bottle, Bumvinyl - Synthetic (Pvc) Binding Material On A Paper Basis Is A Paper Basis, On One Side Of Which A Polyvinyl Chloride Coating Is Applied. Width - 83.0±1.5 Cm., Length - 150 P.M. And 200 P.M. Birch Texture, Blue, Red, Blue, Green. In A Roll Of 150 M., Dextrin Glue. Polysaccharide, Which Is Produced By Heat Treatment Of Starch (Potato Or Corn). The Powder Is White To Cream-Colored, Without Inclusions And Extraneous Odor. It Is A Universal Thickener/Stabilizer That Works In A Wide Temperature Range And Has High Viscosity. High Adhesive Ability. Packing In Bags Of 25 Kg., Motor Oil Kixx G Sj. Api Sj Standard The Type Of Oil Is Semi-Synthetic Sae Oil Viscosity 10W-40., Romark Material. Two-Layer Plastic For Laser And Mechanical Engraving And Cutting Consists Of Two Different Colored Layers - The Base And The Upper Engraving Layer (3 Μm). This Material Is Resistant To Almost All Types Of Negative Effects - Ultraviolet Rays, Burning, Temperature Changes, Mechanical And Chemical Effects. Length, Mm 600 Width, Mm 300 Thickness, Mm 1.3 Sheet Area, M2 0.18., Luversy Series. Stainless Steel Grommets For Hp-4/5 (10Mm). In A Pack Of 1000 Pcs, Solidol Zh Grease. Solidol Fat (Solidol Zh) (Gost 1033-79) Is A General-Purpose Grease; A Mixture Of Petroleum Oils Of Medium Viscosity, Thickened With Hydrated Soap Of Fatty Acids, Which Are Part Of Natural (Vegetable And Animal) Fats. The Main Operational Characteristics Of Fatty Solidol: In Terms Of Basic Characteristics, It Is Close To Synthetic Solidols. It Has The Best Viscosity-Temperature Properties, Compacts Less During Storage, And Also Does Not Thicken Thixotropically When Resting After Destruction. It Is Operational At A Temperature Of -30...+65°С, In Powerful Mechanisms (Bearings, Hinges, Blocks, Etc.) — At -50°С. Freezing Temperature -25 Degrees. Dropping Temperature Is 93 Degrees.