GTR 86321421

Bids Are Invited For Registration Of Prices For The Acquisition Of Medical Equipment As Needed To Equip New Basic Health Units As Well As The Replacement Of Old Equipment, In Compliance With The Department Of Health.

ICB — International Competitive Bid Closed South America
Tender Information
GTR Reference
86321421
Tendering Authority
Subscribe to view
Tender No
107/2024
Financer Name
Self-Funded
Work Title
Bids Are Invited For Registration Of Prices For The Acquisition Of Medical Equipment As Needed To Equip New Basic Health Units As Well As The Replacement Of Old Equipment, In Compliance With The Department Of Health.
Bid Type
ICB — International Competitive Bid
Country
Subscribe to view
Geographical Region
South America
Political Region
BRIC,G20
Last Date of Bid Submission
14-10-2024 Closed
Work Detail
Horizontal Autoclave: With Microprocessed Control System, Internal Chamber Capacity Of At Least 100 Liters. External Dimensions Of The Equipment Not Exceeding 950 X 1600 X 1050 Mm (W X H X D). It Must Operate Using High-Temperature Saturated Steam And Have A Structure Made Of Anti-Corrosive Material And An External Coating Made Of Stainless Steel Sheet. Programmable Microprocessor Control With At Least 10 Programs, With Panel And Control With On/Off Button And Lcd Display (Touch Screen Of At Least 5, 5) For Viewing Programmed Cycles, Pressure Gauge And Vacuum Gauge. It Must Have A Double Chamber, With An External Chamber Made Of Stainless Steel Aisi 304 Or Higher And An Internal Chamber Made Of Stainless Steel Aisi 316-L With Thermal Insulation, An Internal Chamber With A Sandblasted Finish, And The Internal Chamber Must Have A Drain. It Must Have A Central Handwheel-Type Manual Closing Door And An Emergency System With Protection To Prevent It From Being Accidentally Activated. Hydraulic System: Pipes And Connections Of The Hydraulic Assembly Must Be Made Of Anti-Corrosive And Resistant Material (Aisi-316 Stainless Steel); Sterilization Chamber And Steam Generator Connections Must Be Made Of Stainless Steel Or Other Compatible Material; Have A Liquid Ring Type Vacuum Pump And A Centrifugal Water Pump With Sufficient Capacity For The Steam Generator. Validation Input, Allowing The Introduction Of Sensors To Collect Process Temperature Data, A Security System That Should Prevent The Operation Of The Equipment Due To Any Type Of Failure, Operator Carelessness Or Lack Of Supplies In Addition To Audiovisual Alarms. Emergency Button Next To The Door, With Protection To Prevent It From Being Activated Unintentionally. The Noise Cannot Exceed That Established By The Ministerial Labor Ordinance. The Equipment Must Be Accompanied By At Least: 01 Internal Cart For Storing The Cargo With At Least 02 Shelves, Made Of Aisi 304 Stainless Steel Or Higher Quality Material; 01 Set Of Baskets With Equivalent Quantity 01 Load..., Horizontal Table Autoclave (Up To 21Liters): Horizontal Table Autoclave Up To 21Liters, Minimum Dimensions 55.0 X38.0 X38.0 Digital, Sterilization Chamber, Stainless Steel, Minimum Capacity 20 Liters. Digital Panel With Membrane Keyboard Display With Visual And Audible Warnings That Allow Simultaneous Control Of Cycle Parameters, Fully Automatic Through Electronic Smt Microprocessor With Several Programmable Cycles That Allow Time And Temperature Adjustments. Aluminum Tray For Minimum 3 Trays. Door Closing With Rotary Handle; Triple-Stage Lid Closure; Extra Drying;With Open Door /Registered With The Ministry Of Health.Bivolt/ Manufactured In Accordance With Iso:13485 /12 Month Warranty. Included Items: Tray Support/Trays/Dosing Cup/Drain Hose/Instruction Manual In Portuguese., Secretion Aspirator: Complete Surgical Aspirator 5 Liters. Bivolt, 03 Sealed Bearings, Maximum Vacuum: 22 Inches Of Hg, Safety Valve Against Bottle Overflow, Minimum Free Flow: 40Lt/Min, Vacuum Pump Minimum Dimensions (L 8 ± 76, 2. Maximum Vacuum (In.Hg) 22 ± 3 Vacuum Gauge Scale 0 To 76 Cm.Hg / 0 To 30 In.Hg Tripod Flask Made From Psu Minimum Flask 5 Liters And Autoclavable At 134° Hydrophobic Filter Warranty Of 01 Anvisa Registration Year, Adipometer: Approximate Measuring Range: 0 To 78Mm - Accuracy: Tenths Of Millimeters - Tolerance
Key Value
Tender Value
Ref. Document
Tender Documents
Global Tender Document
29cdb83f-433a-4ef9-9b12-ba24a1837427.html
Attachments
Additional Details Available on Click
  • Tendering Authority
  • Publication Document (Tender Document / Tender Notice)
Disclaimer

We take all possible care for accurate & authentic tender information. However, users are requested to refer to the original Tender Notice / Tender Document published by the Tender Issuing Agency before taking any decision regarding this tender.

Tell us about your Product / Services,

We will Find Tenders for you

TenderDetail
Loading tenders