Bids Are Invited For Acquisition Of Materials/Insupples And Permanent Equipment (Surgical Center And Laundry) To Service The Nova Andradina Health Services Foundation, Through Agreement N°. 01/2024, Signed With The Municipality Of Nova Andradina, Through The Municipal Health Secretariat.

Cardioverter - Portable Defibrillator, Adult/Child Carrying Case With A Shoulder Strap With Storage Cases For Accessories. It Has A Color Lcd Screen Of At Least 6.5Â? And A Resolution Of 640X480 Pixels, With A Display Of At Least 3 Simultaneous Curves On The Screen. Reusable External Paddles With Built-In Pediatric Surface With Dedicated Buttons For Charging And Shock Discharging That Have Luminous Indicator Of Ready Charge. Compatible With The Use Of Internal High-Temperature Steam Autoclavable Paddles With Flush Button. Thermal Recorder That Allows The Simultaneous Printing Of At Least Two Waveforms, In Addition To The Printing Of Data Stored In The Equipment Such As: Marked Events, Shock, Alarms, Event Summary, Electrocardiogram, Numerical Trend Of Vital Signs, Operational Tests And History Of Operational Tests. 3- And 7-Lead Ecg Monitoring With Automatic Identification Of The Type Of Connected Cable. Store Numerical Trends Of Vital Signs And Pre-Configured Clinical Events, Such As Drug Administration, For Later Review. Defibrillation With Biphasic Wave Load Adjustable Between 2 And 200J At Least. In Cardioversion Mode, The Time Between R Wave Detection And Shock Triggering Must Be Less Than 60Ms. In Dea Mode Display Timer For Assistance During Cpr. Rechargeable Battery With Minimum Autonomy Of 100 Shocks Or 2.5 Hours Of Monitoring And Maximum Time To Recharge To 100% Of Its Capacity Of Less Than 4 Hours, Possibility Of Changing It Without The Use Of Tools. Carry Out Daily Self-Tests Without The Need For Any Operator Interference And Have A Ready-To-Use Audiovisual Indicator. Maximum Equipment Weight Of 8 Kg. Minimum Environmental Specifications: It Has A Rotating Clothes Dryer With A Capacity Of 30 Kg. Gas Gas Dryer Heating With A Capacity Above 30Kg. Minimum Load Factor 1:25. Structure Must Be Built In Sae 1020 Steel Rigidly Interconnected By Continuous Welding, Providing Total Stability To The Assembly; Cabinet Type, Coated With Double Wall For Thermal Insulation And Drying Efficiency; Internal Basket Must Be Built In Stainless Steel Sheet With Perforations That Provide At Least 45% Of Area For Hot Air Circulation, Shaft In Sae 1020. External Door Made In Sae 1020 Steel, Heat Resistant, With Large Visor To Allow Viewing Clothes In Motion; Transmission System Through Pulleys And V-Belts, By Means Of Double-Axis Electric Motor To Rotate The Basket 01 Hp Extractor Hood, Equipped With Thermal Protection Against Overloads. The Equipment Must Also Feature The Following Items: Extractor Hood With Cast Aluminum Rotor To Remove Saturated Air From The Inside Of The Basket, With A Filter To Retain Fluff; Clothes Drying Must Be Processed By Exhausting The Humid Air, Which Is Previously Subjected To A Heating System Through A Set Of Resistances, Passing Through The Internal Cylinder, And Is Then Conditioned.