Quotation Are Invited For Fabrication, Supply And Installation Of 2-Inch Seamless 316L Stainless Steel Instrument Air Line

Quotation are invited for Fabrication, Supply and Installation of 2-Inch Seamless 316L Stainless Steel Instrument Air Line Between K station and K RO. INTRODUCTION:THIS PROJECT INVOLVES THE FABRICATION, SUPPLY, AND INSTALLATION OF A2-INCH DIAMETER INSTRUMENT AIRLINE USING SEAMLESS 3 16L STAINLESS STEEL,SCHEDULE 40, TO CONNECT K AND K RO. THE AIRLINE WILL BE APPROXIMATELY300 METERS IN LENGTH. THE SCOPE INCLUDES AL L NECESSARY MATERIALS,SUPPORTS, AND ACCESSORIES, AS WELL AS TAKING AND PROVIDING PRECISEMEASUREMENTS FOR THE INSTALLATION.FIGURE 1: TAPPING POINT FROM THE 2-INCH INSTRUMENTS AIR PIPELINE.FIGURE 2: 2-INCH VALVE AT THE TAPPING POINT IN K STATIONKEY TASKS:1. MATERIAL S:·#316L STAINLESS STEEL PIPES: 2 INCHES IN DIAMETER, SCHEDULE 40,SEAMLESS, WITH A TOTAL APPROXIMATE LENGTH OF 300 METERS & RATED FO R THESAME PRESSURE AS THE EXISTING LINE.·#THREADED BALL VALVES: MATCHING THE 2-INCH DIAMETER, MADE FROM 316LSTAINLESS STEEL, AND MAT CHING THE PRESSURE RATING OF THE EXISTING LINE.·#THREADED ELBOWS: SAME MATERIAL AND DIAMETER AS THE PIPE, MADE FROM316L STAINLESS ST EEL AND MATCHING THE PRESSURE RATING OF THE EXISTINGLINE.·#THREADED SOCKETS: SAME MATERIAL (316L STAINLESS STEEL) FOR SEAMLESSCONNEC TIONS AND MATCHING THE PRESSURE RATING OF THE EXISTING LINE.·#THREADED TEES: SAME MATERIAL AND DIAMETER AS THE PIPING AND MATCHINGTH E PRESSURE RATING OF THE EXISTING LINE.·#GASKETS & FASTENERS: NON-ASBESTOS GASKETS, 316L STAINLESS STEELBOLTS, NUTS, AND WASHERS, DE SIGNED TO WITHSTAND THE SAME PRESSURE AS THEEXISTING LINE.·#SUPPORT BRACKETS: SUPPLY & INSTALLATION OF GALVANIZED C-CHANNELSUPPORTS. ·#COATINGS: ONE COAT OF PRIMER FOLLOWED BY TWO COATS OF JOTUN GREY TOPCOATING FOR PROTECTION.·#2-INCH VALVES: SUPPLY AND INSTALLATIO N OF NEEDED VALVES.2. PREPARATORY WORK:·#SITE SURVEY: INSPECT THE SITE TO DETERMINE THE ALIGNMENT ANDREADINESS FOR CONNECTION.·#MATE RIAL ASSESSMENT: CHECK EXISTING MATERIALS AND CONNECTIONS TOENSURE NEW SCHEDULE 40 SEAMLESS 316L PIPES AND FITTINGS ARE COMPATIBLE.· #EXACT LENGTH VERIFICATION: MEASURE THE EXACT LENGTH OF THE SEAMLESSAIRLINE TO CONFIRM THE APPROXIMATE 300-METER LENGTH REQUIRED TO CONNECTK AND K RO.·#MATERIAL VERIFICATION: CONFIRM THAT ALL NEW MATERIALS, INCLUDINGSCHEDULE 40 SEAMLESS PIPES, FITTINGS, AND VALVES , MEET PROJECTSPECIFICATIONS AND INDUSTRY STANDARDS (ASME, ASTM).·#CORING: PERFORM A 3-INCH CORE DRILL IN THE WALL OF THE COMPRESSOR SROOM FOR PIPE ROUTING. Qty: 1 Fabrication, Supply, and Installation of 2-Inch Seamless 316L Stainless Steel Instrument Air Line Between K station and K RO. Contact Person: [email protected] STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332402407)/$value