Tenders Are Invited For Construction Of A Football Pitch In Troszyn - Stage Iii

The Subject Of The Order Is The Implementation Of The Task Entitled: Construction Of A Football Pitch In Troszyn - Stage Iii, Including The Construction Of A Fence, Delivery And Installation Of Ball Catches, Stadium Shelters And Waste Bins. The Task Will Be Carried Out On Plots With Registration Numbers 146, 145/1 Located In The City. Troszyn. The Scope Of Works Includes: - Measurements And Securing The Area - Construction Of Ball Catchers - Construction Of A 4 M High Pitch Fence - Construction Of A 2.2 M High Pitch Fence - Purchase, Delivery And Assembly Of A Stadium Shelter For 14 Seats - 2 Pcs. - Purchase And Delivery And Installation Of External Waste Bins - 4 Pieces - Tidying Up The Area. On Plot 146 There Is A Football Pitch With A Natural Grass Surface, A Locker Room Building And A Synthetic Grass Pitch, Where The Above-Mentioned Works Are Planned, Including The Construction Of A Fence, Delivery And Installation Of Ball Catches, Stadium Shelters And Waste Bins. Requirements For Ball Catchers And Stadium Shelters:1. Ball Catchers H=600Cm – The Ball Catchers Are Designed With The Possibility Of Disassembly. The Height Of The Designed Ball Catchers Is 6 M, The Spacing Of The Posts Is Max. 3.0 M. The Posts Are 100X100x4 Mm (Embedded In Concrete Sleeves Enabling Easy Disassembly), Galvanized Or Aluminum, Painted In Ral6005. Anchoring In Concrete Footings Min. 80 Cm. End Posts With Diagonal Braces Mounted With Screws. Specialist Net Dedicated To Ball Catchers - Polypropylene, Mesh Size 80Mm X 80Mm And 5Mm Thick, With Additional Edge Reinforcement With A Ø 2.3Mm Green Rope. Concrete Foundation Footings For C25/30 Sleeves, Dimensions 50 X 50 Cm, Sunk 120 Cm Below The Ground Level. The Design Of The Ball Catcher Must Be Made In Such A Way That It Can Be Dismantled And Reassembled In A Short Time. 2. Stadium Shelters For Players Should Have A Platform And Be Permanently Anchored To The Foundations. The Detailed Scope Of Works And The Conditions For Their Implementation Are Specified In: 1) Design Documentation - Annex No. 9 To The Swz, 2) Technical Specification For The Execution And Acceptance Of Works - Annex No. 10 To Swz, 3) Bill Of Quantities - Annex No. 11 To The Swz, Which Is Illustrative And May Constitute Supporting Material For Preparing The Price Calculation By The Contractor. The Contractor Should Calculate The Value Of The Works Based On The Design Documentation, 4) Designed Provisions Of The Contract (Appendix No. 8 To The Swz). 5) Post-Construction Geodetic Inventory Of The Pitch And The Location Of The Cable And Power Lanterns - Annex No. 12 To Swz. Note: The Ordering Party Informs That The Scope Of: - Construction Of A Pitch With A Synthetic Grass Surface, - Construction Of Pitch Lighting Was Entirely Completed In Previous Years, Due To Therefore It Should Not Be Included In The Offer Price. The Ordering Party Provides The Contractor With A Post-Construction Surveying Inventory Of The Pitch And The Cable And Power Lanterns.