Bids Are Invited For Future, Partial And Eventual Acquisition Of Chairs, Stringers And The Like To Serve The Municipal Administration Secretariat And Other Secretariats

Executive Box Chair, Backrest With Structure Injected In Structured Copolymer Polypropylene With Ribs, Glue Anchor Edge And Channel For Staples. It Has An Anatomical Curvature In The Backrest In Order To Allow The Accommodation Of The Dorsal And Lumbar Regions, Adapting Better To The Spine. Anatomically Injected Foam In High-Resistance Microcellular Flexible Polyurethane, Cfc-Free, With Controlled Density Of 45 To 55 Kg/M³ With An Average Thickness Of 40 Mm. Backrest Covering In Ecological Leather, Fixed By Clips With A Zinc-Plated Finish To The Plastic Backrest. In The Terms Of Reference., Fixed Chair Made With Structure Injected In Polypropylene Copolymer In Black Color Structured With Ribs, Glue Anchor Edge And Channel For Staples. Anatomically Injected Foam In High-Resistance Microcellular Flexible Polyurethane, With Controlled Density Of 45 To 55 Kg/M³ With 40 Mm Average Thickness On The Backrest. Backrest Covering In Ecological Leather, Fixed By Clamps Zinc Finish. Backrest Cover Injected In Polypropylene Textured Copolymer In Black Color, Assembled By Snap, Assisting In Future Maintenance. The Backrest Is Fastened To The Structure With Combined Slotted Machine Screws, In Gauge ¼X 20 Fpp And Claw Nuts Embedded And Riveted In The Plastic. , Anatomically Hot Molded With 12 Mm Medium Thickness. It Has A Curvature On The Front Of The Seat To Avoid Strangulation In The Bloodstream. Other Specifications Are In The Terms Of Reference., Executive Swivel Chair, Fixed By Clamps With Zinc Finish On The Plastic Backrest. Backrest Cover Injected In Textured Copolymer Polypropylene In Black, Assisting In Future Maintenance. Other Specifications Are In The Terms Of Reference., Longer For Waiting, 3 Seats, Backrest Injected In High-Resistance Polypropylene Copolymer, With Color Standardized By Special Pigments. It Has An Anatomical Curvature, In Order To Allow The Accommodation Of The Dorsal And Lumbar Regions, Adapting Better To The Spinal Column.Hand Grip To Assist In Movement And Transportation.Aeration Holes In An Elliptical Design.Backrest And Seat Support Made Of Sae Steel Tube 1010/1020 Oblong 16X30 Mm And 1.50 Mm Wall Thickness. Union Crossbars Made Of Sae 1020 Fqd Steel Plates With 4.76 Mm Thickness With Threaded Hole In Gauge ¼X 20 Fpp For Subsequent Fixing To The Structure By Bolting. The Union Of The Crossbars On The Backrest And Seat Support Tube Is Done Using A Mig Welding Process In A Robotic Cell, Forming A Single Structure For Subsequent Assembly On The Structure. Tips And Finishes In Injected Copolymer Polypropylene In Black. Other Specifications Are In The Terms Of Reference., Fixed Armchair, Backrest Made With Frame Support Structure Made With Round Steel Tubes Sae 1010/1020 With 19.05 Mm In Diameter (5/8”) And 1.90 Mm In Thickness Wall Panels Cold Curved Using Cnc Bending Machine. Backrest Covering In 100% Polyester Fabric With An Average Weight Of 600 G/M² With Reinforced Stitching At The Edges. Seat Made Of Amescla Plywood With An Average Thickness Of 18 Mm. The Front Finishing Part Of The Seat Is Made Of Amescla Plywood