Request For Quotation Works On Diagnostics And Repair Of Special And Specialized Equipment

Carrying Out Full Diagnostics Of The Hydraulic System Of The Gs-14.02 Motor Grader (Yamz-236 Engine), Namely: The Hydraulic System Of The Motor Grader Consists Of Two Hydraulic Pumps Нш-32-3-Л, Нш16n4 - 4 Pcs. Hydraulic Distributors - Mkrn.306154.013, Mkrn.306153Tu - 8 Pcs. Hydraulic Distributors - Mkrn.306153002 - 2 Pcs. Hydraulic Distributors - Mkrn.306153006 - 2 Pcs. Hydraulic Cylinder - Гц05-80Х50х1000-01 - 4 Pcs. Hydraulic Cylinder - Гц02-125Х70х400.000-03 - 2 Pcs. Hydraulic Cylinder - Hc-80X50x14.00.000 - 2 Pcs. Hydraulic Cylinder Hc05-80X50x710 - 2 Pcs. Hydraulic Cylinder Hc02-100X50x250a - 4 Pcs. Hydraulic Cylinder Hc02-80X50x160 - 2 Pcs. Hydraulic Cylinder Hc02-80Х50х280.0006 – 4 Pcs. Hydraulic Cylinder 225.81.02.00.000A – 2 Pcs. - Pneumohydraulic Accumulator Arch-1/320 Tu2-053-1410-79 – 4 Pcs. - Hydraulic Motor – 310.3.56.00 Tu22-1.020-100-95 – 2 Pcs. - Power Steering, Pump Dispenser D-160-14.20-02 – 2 Pcs. - Hydraulic Booster Valve (Disconnecting) – 274.11.02.00.000 – 2 Pcs. - Charging Valve Kpr10t018 – 2 Pcs. - Hydro Lock Mkrn.304266.005 – 8 Pcs. - Safety Valve - 6 Pcs. - Delay Valve - 253.45.0303.000 - 4 Pcs. - Hydraulic Clutch Booster 274.12.01.00.000 – 2 Pcs. When A Defect (Defects) Is Detected As A Result Of Diagnostics, Repair To Eliminate The Defect (Defects) And Subsequent Inspection Of The Hydraulic System Of The Gs-14.02 Motor Grader In The Amount Of 2 Units (Yamz-236 Engine). Replacement Of Repair Kits At The Expense Of The Supplier., Carrying Out Full Diagnostics Of The Hydraulic System Of The B-10M/T-10M Bulldozer (D-160 Engine), Namely: - The Hydraulic Control System Is Carried Out By Pumps Nsh-32Uk3l, Nsh-32U-2L, Nsh-32U-3L. - Clutch Clutch - Hydrotransformer - 4 Pcs. - Hydraulic Distributors R-160-3/1-111-U, R-160-3/1-111-T - Servomechanism For Controlling The Rotation Of Hydromechanical Transmissions - 8 Pcs. - The Main Pump For Raising And Lowering The Blade Of The Shovel, The Hydraulic Grubbing Machine Is Carried Out By Nsh-100 – 4 Pcs. - The Main Hydraulic Cylinder For Lifting And Lowering The Shovel Blade - Гц-131-26-108-02Сп - 8 Pcs. - Hydraulic Cylinder Of Lifting And Lowering Of The Hydraulic Lifter (Canine) - 4 Pcs. Hydraulic Transmission Of Brakes On Both Sides Of The Brake Belts - 8 Pcs. When A Defect (Defects) Is Detected As A Result Of Diagnostics, Repair To Eliminate The Defect (Defects) And Subsequent Check Of The Hydraulic System Of The Bulldozer In The Amount Of 4 Units Of B-10M/T-10M (D-160 Engine). Replacement Of Repair Kits At The Expense Of The Supplier., Carrying Out Full Diagnostics Of The Hydraulic System Of The Ek-14.20 Excavator (D-245 Engine), Namely: The Hydraulic System Works From The Main Axial-Piston Hydraulic Pumps - 313.4.55.557.483 - 2 Pcs. Which Sets The Entire Hydraulic System In Motion. - Main Rotary Pump – 1 Pc. - Main Twin Hydraulic Cylinders – 2 Pcs. - Hydraulic Cylinder Booms – 1 Pc. - Bucket Hydraulic Cylinders – 1 Pc. All This Mechanism Is Controlled By The Main Hydraulic Distributor. - Otsekaet Alternate Hydraulic Valve - 7 Pcs. - Hold Hydraulic Cylinders At Different Phases Of Work - Hydraulic Lock - 5 Pcs. - The Main Movement Of The Excavator Is Carried Out By A Hydraulic Box - 1 Pc. Which Are Connected To The Forward, Backward Joystick And The Power Take-Off Hydraulic Box - 1 Pc. When A Defect (Defects) Is Detected As A Result Of Diagnostics, Repair To Eliminate The Defect (Defects) And Subsequent Inspection Of The Hydraulic System Of The Ek-14.20 Excavator (D-245 Engine). Replacement Of Repair Kits At The Suppliers Expense. Gost-18322-2016 The Potential Supplier, In The Event That He Is Identified As The Winner And A Contract Is Concluded With Him, Undertakes To Deliver The Goods To Rgu 24-Deu Of The Ministry Of Defense Of The Republic Of Kazakhstan By The Specified Delivery Date. Transportation Of Engineering Equipment For Diagnosis Or Repair To The Service Providers Service Station Or To Another Special Service Center And Back Is Made At The Expense Of The Service Provider., Carrying Out Full Diagnostics Of Hydraulic Cylinders Of The B-140 Front Loader (Yamz-236 Engine), Namely: - The Hydraulic System Is Carried Out By The Main Hydraulic Pump - 1 Pc. - Through Hydraulic Distributors - 2 Pcs. - It Goes To The Hydraulic Clutch Booster - 1 Pc. - Main Hydrovacuum Disc Brakes - 6 Pcs. - The Work Of All The Organs Of The Hydraulic System Is Connected With The Pneumohydraulic Accumulator, Which Stabilizes The Hydraulic System In Total - 1 Pc. When A Defect (Defects) Is Detected As A Result Of Diagnostics, Repair To Eliminate The Defect (Defects) And Subsequent Inspection Of The Hydraulic Cylinders Of The B-140 Front-End Loader (Yamz-236 Engine). Replacement Of Repair Kits At The Expense Of The Supplier. Gost-18322-2016 The Potential Supplier, In The Event That He Is Identified As The Winner And A Contract Is Concluded With Him, Undertakes To Perform Work And Service At Rgu 24-Deu Of The Ministry Of Defense Of The Republic Of Kazakhstan Within The Specified Delivery Period. Transportation Of Engineering Equipment For Diagnosis Or Repair To The Service Providers Service Station Or To Another Special Service Center And Back Is Made At The Expense Of The Service Provider., Inspection, Repair, Adjustment Of The High-Pressure Fuel Pump (Hpf) Of The B-140 Front Loader (Yamz-236 Engine), Namely: - Repair And Adjustment Of The Automatic Gearbox - 1 Pc. - High-Pressure Fuel Pump For The Yamz-236 Engine – 1 Pc. - Inspection, Repair Or Replacement In Case Of Wear Of The Injection Pump Rail - 1 Pc. - Inspection, Repair Or Replacement In Case Of Wear Of The Main Balancer Of The Injection Pump - 1 Pc. - Inspection, Repair Or Replacement In Case Of Wear Of The Fuel Injection Regulator - 1 Pc. - Inspection Or Replacement In Case Of Wear Of The High Pressure Pump Bearings - 2 Pcs. - Inspection Or Replacement In Case Of Wear Of Repair Kits Of The Fuel Injection Pump - 1 Set. - Inspection Or Replacement Of The High-Pressure Fuel Pump - 1 Pc. - Replacement Of Calibrated Plunger Pairs – 6 Pcs. - Repair Of Nozzles - 4 Pcs. - Replacement Of Calibrated Sprayers - 4 Pcs. - Precise Adjustment Of The High-Pressure Fuel Pump Of The Tnvd. When A Defect (Defects) Is Detected As A Result Of Diagnostics, Repair To Eliminate The Defect (Defects) And Subsequent Inspection Of The Performance Of The Tnvd Front-End Loader B-140 (Yamz-236 Engine) Replacement Of Rem. Set At The Expense Of The Supplier., Inspection, Repair, Adjustment Of The High-Pressure Fuel Pump (Hpvd), In The Amount Of 4 Units Of The B-10M/T-10M Bulldozer (D-160 Engine), Namely: - D-160 High-Pressure Fuel Pump – 4 Pcs. - Inspection, Repair Or Replacement In Case Of Wear Of The Injection Pump Rail - 4 Pcs. - Inspection, Repair Or Replacement In Case Of Wear Of The Main Balancer Of The Injection Pump - 4 Pcs. - Inspection, Repair Or Replacement In Case Of Wear Of The Fuel Injection Regulator - 4 Pcs. - Inspection Or Replacement In Case Of Wear Of The High Pressure Pump Bearings - 10 Pcs. - Inspection Or Replacement In Case Of Wear Of Repair Kits Of Tnvd - 4 Sets. - Replacement Of Calibrated Plunger Pairs - 20 Pcs. - Repair Of Nozzles - 20 Pcs. - Replacement Of Calibrated Sprayers - 20 Pcs. - Fine Adjustment Of Fuel Injectors – 20 Pcs. - Accurate Adjustment Of Fuel Injection Pump - 4 Pcs. - Inspection Or Replacement Of The Fuel Pump - 4 Pcs. When A Defect (Defects) Is Detected As A Result Of Diagnostics, Repair To Eliminate The Defect (Defects) And Subsequent Inspection Of The Performance Of The High Pressure Fuel Pump Of The B-10M/T-10M Bulldozer. Replacement Of Repair Kits At The Expense Of The Supplier - 4 Pcs., Carrying Out Full Diagnostics Of The Hydraulic System-Hydraulic Pump (Operates Under Oil Pressure) Of Asfk-3.02 Asphalt Paver (D-260 Engine), Namely: - Undercarriage - Main Drive Pump. -Separate Drive Of The Left And Right Questioner -Left, Right Auger - Drive Of Ramming Bars Of The Working Body - Vibrator Drive - Extension Of Expanders - Raising And Lowering The Working Body And Setting It In A Floating Position - Dumping Of The Bunker -Adjusting The Thickness Of The Laying Layer On The Left And Right Separately - Steering Hydraulic Motor - 310.3.56.0068 - 4 Pcs. Hydraulic Motor - A6ve80ez4 - 2 Pcs. Gr-90 Hydraulic Pump – 1 Pc. Non-Adjustable Axial-Piston Pump 310.2.28.04.05 Tu22-10.20-100-95 – 1 Pc. Dispenser Pump D-100, Tu Rb 7900 79682.001-2002 – 1 Pc. Gear Pump - Nsh-10 Special - 1 Pc. Hydraulic Distributors - Mkrn-306.153.104 - 1 Pc. Hydraulic Distributors - Mkrn-306.153.106 - 1 Pc. Hydraulic Distributors - Mkrn-306.153.006 - 2 Pcs. Hydraulic Distributors - Mkrn-306.154.002 Tu - 1 Pc. Hydraulic Cylinders - Hc02-50X32x160 - 2 Pcs. Hydraulic Cylinders - Гц02-50Х32х320 - 2 Pcs. Hydraulic Cylinders - Гц02-50Х32х500 - 2 Pcs. Hydraulic Cylinders - Гц02-80Х32х1000 - 2 Pcs. Hydraulic Cylinders - Гц02-80Х32х280 - 2 Pcs. Flow Divider – V00740121111 – 1 Pc. Hydro Lock - Mkrn.304.266.005 - 5 Pcs. Electromagnetic Valves - 4 Pcs. Reversing Hydraulic Valve Ko-15/3126. Replacement Of Repair Kits At The Expense Of The Supplier. Gost-18322-2016 The Potential Supplier, In The Event That He Is Identified As The Winner And A Contract Is Concluded With Him, Undertakes To Perform Work And Service At Rgu 24-Deu Of The Ministry Of Defense Of The Republic Of Kazakhstan Within The Specified Delivery Period. Transportation Of Engineering Equipment For Diagnosis Or Repair To The Service Providers Service Station Or To Another Special Service Center And Back Is Made At The Expense Of The Service Provider., Inspection, Repair And Adjustment Of The High-Pressure Fuel Pump (Hpvd) In The Amount Of 2 Units, Nozzles In The Amount Of 12 Units On The Gs-14.02 Motor Grader (Yamz-236 Engine), Namely: - High-Pressure Fuel Pump For The Yamz-236 Engine – 2 Pcs. - Inspection, Repair Or Replacement In Case Of Wear Of The Injection Pump Rail - 2 Pcs. - Inspection, Repair Or Replacement In Case Of Wear Of The Main Balancer Of The Injection Pump - 2 Pcs. - Inspection, Repair Or Replacement In Case Of Wear Of The Fuel Injection Regulator - 2 Pcs. - Inspection Or Replacement In Case Of Wear Of The Injection Pump Bearings - 4 Pcs. - Inspection Or Replacement In Case Of Wear Of Repair Kits Of Tnvd - 2 Sets. - Inspection Or Replacement Of The High-Pressure Fuel Pump - 2 Pcs. - Replacement Of Calibrated Plunger Pairs – 12 Pcs. - Repair Of Nozzles - 12 Pcs. - Replacement Of Calibrated Sprayers - 12 Pcs. - Precise Adjustment Of The High-Pressure Fuel Pump Of The Tnvd. When A Defect (Defects) Is Detected As A Result Of Diagnostics, Repair To Eliminate The Defect (Defects) And Subsequent Performance Check Of The Fuel Pump Of The Gs-14.02 Motor Grader (Yamz-236 Engine). Replacement Of Repair Kits At The Suppliers Expense.