Tenders Are Invited For Design And Construction Of Heating Connections For Single-Family And Two-Unit Residential Buildings In Michałów.

1. The Subject Of The Order Is: Design And Construction Of Heating Connections To: 12 Single-Family And Two-Unit Residential Buildings At Ul. Sosnowa And Klonowa In Michałów; 4 Single-Family, Two-Unit Residential Buildings At Ul. Hieronimowska In Michałów; 6 Single-Family, Two-Unit Residential Buildings At Ul. Plac 11 Listopada In Michałów And 10 Single-Family, Two-Unit Residential Buildings At Ul. Fabryczna In Michałów.2. The Scope Of The Order Includes: 1) Preparation, On A Copy Of The Map For Design Purposes (In The Investors Possession), Of A Site Plan With The Route Of The Designed Connection Route, With The Necessary Calculations, And Drawing As-Built Profiles Of The Constructed Connections. The Location Of The Connections Should Be Agreed At Each Stage With The Ordering Party, 2) Obtaining The Required Arrangements With The Network Operator, 3) Obtaining The Required Arrangements With The Contractor For The Construction Of Single-Family Houses In Individual Locations. 4) Construction Of A High-Parameter, Pre-Insulated Heating Connection To The Designed Residential Buildings At Ul. . Sosnowa, Klonowa, Fabryczna, Hieronimowska And Plac 11 Listopada In Michałów, With Parameters Consistent With The Standard And Calculated, 5) Construction Of Heating Substations In Single-Family Houses (64 Apartments) Equipped With A Heat Exchanger, Pumps, Actuators, Heat Meter, Regulators, Filters, Etc. . The Heating Pipeline Located In The Apartments Is Terminated With A Shut-Off Valve, 6) Carrying Out A Geodetic Inventory By The Competent Geodetic Services And Placing The Connections On The Basic Map, 7) Construction Of Connections And Connection Of Pipes With Existing Pipes Of Residential Buildings In The Locations In Question, 8) Place Of Future Connection Heating Connections To The Designed Heating Network Should Be Made Using Pre-Insulated Technology (Location Visible In The Graphic Attachment), The Network Should Be Plugged,9) Connections To Individual Residential Premises Should Be Made By Installing A System Branch,10) Shut-Off Valves Should Be Installed On The Connection (To The Residential Premises) With Access To The Stem Through Valve Boxes As Close As Possible To The Connection Point,11) Work Related To The Construction Of Connections Should Be Carried Out Based On The Guidelines And Instructions Of The Manufacturers Of Pre-Insulated Pipes,12) The Connections Should Be Made Using The Self-Compensation Method (Shaped Bends),13) In The Case Of Heating Connections Through Access Roads Or Parking Lots, If It Is Not Possible To Maintain The Standard Soil Cover, The Pipelines Should Be Protected With Relief Plates Placed 15 Cm Above The Pipelines On Shock-Absorbing Ballast,14) Work Related To The Construction Of The Connection Should Be Carried Out Based On The Guidelines And Instructions Of The Manufacturers Of Pre-Insulated Pipes.3. A Detailed Description Of The Subject Of The Order Is Provided In Annex No. 7 To The Swz Description Of The Subject Of