Tenders Are Invited For Construction Of Modular Locker Room And Sanitary Facilities At The Sports Field In Zelgniew

The Subject Of The Order Is The Construction Of Modular Cloakroom And Sanitary Facilities At The Sports Field In Zelgniew At Ul. Wspólna, On A Plot With Geodetic Id 301903_5.0012.108. The Sports Facilities Building Includes: Two Sets Of Changing Rooms For Players With Sanitary Facilities, A Room For Judges, Sanitary Facilities For The Disabled. The Scope Of Works Includes: Construction Of A Building Using A Modular Construction System. The Building Consists Of Four Segments Previously Prepared In The Prefabrication Plant And Then Assembled On The Construction Site. Individual Modules Will Be Equipped With All Installations. The Building Will Be Placed Directly On Foundation Walls. The Foundation And Foundation Walls Are Made Of M6 Concrete Blocks Made Of C12/15 Concrete With M5 Cement Mortar. Wall Construction Class B. Wall Thickness – 25 Cm. The Foundations Should Be Laid On The Bottom Of The Excavation, Leveled With A Layer Of Concrete. Technical Characteristics Of The Structure: 1. The Basic Supporting Structure Is A Self-Supporting Frame Welded From Cold-Bent Profiles. Connecting Containers By Screwing At The Corners With Screws. All Structural Elements Are Protected Against Corrosion By Galvanizing And Painting. Main Structure (Frame) In Fire Protection Class R30.2. External Walls – Made Of Sandwich Panels With Sheet Metal Cladding And Thermal Insulation Filling With Pir Foam. Thermal Insulation Thickness Of The Walls – 12 Cm. Walls With Fire Protection Class Ei30.3. Flat Roof – Made Of Sandwich Panels With Sheet Metal Cladding And Thermal Insulation Filling With Pir Foam. Thermal Insulation Thickness Of Roof Panels – 15Cm.4. Floor Structure - Wooden Or Metal Grate Attached To The Main Frame Of The Container, Floor Covering Made Of 22 Mm Thick Waterproof Plywood, Thermal Insulation Made Of Mineral Wool Placed Between The Grate Beams, Bottom Casing Made Of Galvanized Sheet Metal. Internal Finish 1. Partition Walls Partition Walls Separating Rooms - Made Of Sandwich Panels Filled With Pir Foam, Wall Thickness 6 / 8 Cm (See Markings On The Plan).2. Floorsload-Bearing Floor Covering - 22Mm Thick Waterproof Plywood. Top Floor - Liquid Foil Waterproofing, Top Floor Made Of Pvc Lining, Sealing The Joint Between The Floor And Walls By Welding.3. Finishing Of Walls And Ceilings. Finishing Of Walls And Ceilings - Galvanized And Factory-Varnished Sheet Metal In A Light Housing System.4. Window And Door Joinery And Joinery4.1. Windows – Pvc, White, Insulated Glass 4T + 16Ar +4 + 16Ar + 4T Thermal Insulation With Low-Emission Coating Uw = 0.9W/M2k. 4.2. Interior Doors - Wooden, Parameters According To The Joinery List.4.3 Entrance Door To The Building - Aluminum, Thermally Insulating Profile, Door Equipped With A Door Closer, Thermal Requirements Max Ud = 1.3W/M2k, Powder Coating, Graphite Color.5. Locksmith And Carpentry Elements5.1. Roofing Of Entrances To The Building - With A Metal Structure, Powder-Coated, Covered With Double-Chamber Polycarbonate P