Tenders Are Invited For Construction Of A Parking Lot At The Roman Catholic Cemetery In Brańsk

1.1. The Subject Of The Order Are Construction Works As Part Of The Task Entitled: Construction Of A Parking Lot At The Roman Catholic Cemetery In Brańsk. The Task Is Co-Financed By A Subsidy From The Budget Of The Podlaskie Voivodeship. The Subject Of The Order Is The Construction Of A Parking Lot For Passenger Cars In Front Of The Roman Catholic Cemetery In Brańsk At Ul. Bielska On Plots No. 512/10, 512/11, 922 Within 051 Brańsk, Poviat. Bielski. The Scope Of The Investment Includes (Stage I): Construction Of A New Parking Surface Structure With A Frame - A Pedestrian Route To The Cemetery Gate With A Width Of 5.0 M, 41 Parking Spaces, Including 4 Spaces For Disabled People, And Maneuvering Roads To Them, 5.0 M Wide. (Plot Marked With Geod. No. 512/10). Along The Cemetery Wall, At The Border Of The Plot, There Is A 2.0 M Wide Hardening Intended For Pedestrian Traffic, Adjacent To The Maneuvering Road. The Access And Area Around The Existing Toilet Are Also Planned To Be Hardened. All Hard Surfaces Should Be Made Of 8 Cm Thick Concrete Paving Stones, With Different Colors To Visually Distinguish Their Purpose And Function. The Surface Of Parking Spaces For Passenger Cars Should Be Gray, Maneuvering Roads Should Be Graphite, And Sidewalks And Other Hardening Surfaces Should Be Red. Parking Spaces For Disabled People Are Additionally Painted And Marked In Accordance With The Applicable Marking Regulations. The Parking Area At The Edge Of The Hardening Will Be Framed With Embedded Concrete Curbs 12Cmx25cm. Behind The Border On The Side Of The Lawns, Gravel Roads Are Planned, 0.75 M Wide, Made Of 10 Cm Thick Cnr Aggregate. In The First Stage, On The Section From W-1 To W-5, The Border On The Right Side Of The Road Surface Of The Internal (Maneuvering) Road Is Temporarily Framed With A 12X25 Resistor - In The Place Of The Designed Surface Made Of Concrete Paving Stones. The Scope Of The Investment Also Includes The Reconstruction Of The Exit To District Road No. 1599B, ​​I.E. Ul. Bielska.1.2. The Detailed Scope And Description Of The Subject Of The Order And The Method Of Its Implementation Were Specified In: 1) The Contract Template Constituting Annex No. 2 To The Swz, 2) Design Documentation, Bills Of Quantities, Detailed Technical Specification For The Execution And Acceptance Of Construction Works Constituting Annex No. 1 To The Swz, Which Constitutes Will Be An Annex To The Contract; The Ordering Party Requires That The Subject Of The Order Be Implemented On The Terms And Principles Specified In The Contract Template And In Accordance With The Design Documentation. The Ordering Party Informs That The Attached Bill Of Quantities Is For Illustrative/Informative Purposes And Cannot Constitute The Sole Basis For Calculating The Offer Price. The Values ​​Presented In The Bill Of Quantities Are For Auxiliary Purposes In Calculating The Offer Price, And The Price Offered By The Contractor Is A Lump Sum, Therefore It Should Include All Expenditure That