Tenders Are Invited For Replacement Of Non-Energy-Saving Street Lighting Fixtures With Energy-Saving Led Fixtures In The Kolbuszowa Commune

The Investment Task Entitled: Replacement Of Non-Energy-Saving Street Lighting Fixtures With Energy-Saving Led Fixtures In The Kolbuszowa Commune Is Co-Financed By The Polish Government Fund: Strategic Investment Program, No. Edycja9rp/2023/1667/Polskilad. Investment Location: In Kolbuszowa, Kolbuszowa Dolna, Kolbuszowa Górna, Kupno, Widełka, Kolbuszowa Commune, Kolbuszów Poviat, Podkarpackie Voivodeship.The Scope Of Works Includes:1. Delivery And Replacement Of Non-Energy-Saving Luminaires With 461 Led Luminaires Of Various Powers And Types, According To Annex No. 2 And No. 3.2. Delivery And Replacement Of Approximately 30 Pipe Booms3. Overvoltage Of Existing 230 V Sockets For Decorative Lighting, Approximately 15 Pcs.4. Delivery Of Lighting Controllers As Described, 25 Pcs. 5. Preparation Of Necessary Measurements And As-Built Reports. A Detailed Description Of Energy-Saving Led Luminaires And The Required Evidence Is Presented In Stwior, Which Is An Annex To The Contract. Detailed Description Of Lighting Controllers: Degree Of Tightness And Degree Of Impact Resistance Of The Module Min. Ip65, Min. Ik08 , Meets D4i And Zhaga Standards, Uses The Lora 1.1 Standard With Roaming Support For Integration With External Software, Supports Class C Lora, Allows Configuration Of All Parameters Via Lora, Allows Forcing Execution Of All Commands Via Lora, Allows Forcing Configuration Sending And All Operating Parameters Via Lora, Sends Confirmation Of Receipt Of Lora Messages, Enables Singlecast And Multicast Lora Communication, Supports Lora Mac Commands From 0X01 To 0X0f Inclusive, Sent From/To The Device And From/To The Base Station, Performs Otaa Activation, Is Compliant With The Lora Regional Parameters 1.1 Specification, Operates At The Eu868 Frequency, Maximum Energy Consumption From The Luminaire Is 1W, Enables Remote Software Update, Automatically Recognizes The Connected Luminaire, Sends Operating Parameters Via Lora At A Configured Interval, Such As: A) Date And Message Sending Time In Utc,B) Rssi And Snr Of Messages,C) Sum Of The Luminaires Operating Time In Hours,D) Sum Of The Power Supplys Operating Time In Hours,E) Sum Of The Energy Consumption Of The Luminaire And Controller In Wh,F) Current Energy Consumption Of The Luminaire And Module In W,G) Lighting Power Of The Luminaire In %,H) Power Factor,I) Voltage In V, Sends Information About All Errors Preventing The Correct Operation Of The Luminaire And/Or Controller, Preventing Stable Communication With The Module, Affecting The Correctness Of Operating Parameters, Preventing The Correct Configuration Of The Module And Preventing The Execution Of Sent Commands, Enables The Configuration Of The Lighting Schedule Using Hourly Steps, Based On Sunrise/Sunset In The Module Location And Based On The Level Of External Light, Allows The Configuration Of The Luminaire Dimming Time And The Configuration Of The Default Lighting Power Of The Luminaire In % , Allows You To Configure The