Tenders Are Invited For Supply And Installation Of Electronic Weighing And Weight Printing Elements

Tenders are invited for Supply and Installation of Electronic Weighing and Weight Printing Elements for Two Weighbridges and Six Weighing Silos at the Odeca Coffee Peeling and Packaging Plant Located in Buterere. 1 weight indicators with internal printer Model: SC20/IMP/PC alphanumeric electronic indicator Class: III Maximum number of divisions: 6000 Sensor excitation voltage: 8 V DC Max. signal voltage for dead load: 16 mV Minimum signal voltage for dead load: 0 mV Minimum voltage of the verification step: 1 µV Minimum measuring voltage range: 8 mV Max. measuring voltage range: 24 mV Minimum sensor resistance: 80 Max. sensor resistance: 20000 Temperature range: -10 to 40° Power source conditions (VAC): 220 V+5%-15% Value of proportional error: Pi =0.5 system direction: available (unlimited cable length) 2 Sensors Qty : 10 Type: CS-A/25 AND CS-A/15 Capacity: 10t-15t-20t-25t-35t-40t-50t-100t Divisions: up to 6000 OIML-R60 divisions IP Index: IP-69K Accuracy class: C3-C4-C5-C6 Sensitivity (RO): 2mV per V Tension dexcitation 5...15V Input resistance: 800 ± 50 Output resistance: 700 ± 30 Zero balance: ±1% Safety load limit: 150% Emax Ultimate load limit: 300% Emax Insulation resistance: >5000 3 Accessories Sensor cuvettes: CONJO-BASES/CS QtY: 10 Plastic junction box for 4 to 16 weighing sensors (CAJA/4-PL) QtY: 02 CPU weight cartridges with 1 RS232 port and 1 RS485 port (CART/CPU-1SIE) QtY: 10 Accuracy class supplement to C6 CS sensor: SUP/C6-CS QtY: 10 LAPP flexible PUR (electronic) connection cables UNITRONIC; dimension: 5X1mm² QtY: 100 M other possible accessories Qty : 100ff 04 Installation Qty 100ff lifting the aprons for the installation of the sensors/load cells installation of sensors/load cells resting aprons connection and hookup of the entire system Commissioning and Calibration/System Calibration 05 Formation Train 4 technicians for the use and maintenance of the system QTy : 100ff b. Supply and installation of electronic weighing and printing system elements for 6 weighing silos with a capacity of 8 tonnes each. N° IDENTIFI CATION SPECIFICATION IN Q 06 1 weight indicators with printer cable Type: SCA10-I with 2RS System: weight-tare piece count Keyboard: Numeric with cursors Manual weight adjustment Accumulation and auto-accumulation of weights Manual tare and parts counting function Sensor excitation voltage: 8 V DC Max. signal voltage for dead load: 16 mV Minimum signal voltage for dead load: 0 mV Minimum voltage per verification interval: 1 µ Minimum measuring voltage range: 8 mV Max. measuring voltage range: 24 mV 2 Sensors 3 Printer 4 Minimum sensor resistance: 40 Max. sensor resistance: 2000 Temperature range: -10 to 40°C a/d converter: 24 bits (10,000 div) Power supply: 220 VAC [Disclaimer: The above text is machine translated. For accurate information kindly refer the original document.] Tender Link : http://www.armp.bi/index.php/avis-d-appel-d-offres/marches-ouverts/fourniture