Bids Are Invited For Hiring A Company To Install An Accessibility Elevator In The Current Emergency Service Building.

Simple Concrete Floor Demolition, Manually, Without Reuse. Af_09/2023, Demolition Of Perforated Block Masonry, Removal Of Windows, Siding With Metal Tile. Af_03/2024, Concrete Drill Stake, 30Cm Diameter, Manual Excavation With Shell Auger, Fully Reinforced. Af_05/2020_Pa, 09/09/2024, Manual Excavation For Crowning Block Or Footing (Including Excavation For Placing Formwork). Af_01/2024, Manual Excavation For Baldrame Beam Or Running Footing (Including Excavation For Placing Formwork). Af_01/2024, Manufacture, Assembly And Disassembly Of Formwork For Crowning Block, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Assembly And Disassembly Of Formwork For Baldrame Beam, Block Frame Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Block Frame Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Block Frame Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Concreting Of Crowning Block Or Baldrame Beam, Fck 30 Mpa, Using Jerica - Laying, Thickening And Finishing. Af_01/2024, Manufacture Of Formwork For Columns And Similar Structures, E=25 Mm. Af_09/2020, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, 4 Uses. Af_09/2020, Concreting Of Pillars, Fck = 25 Mpa, Using Buckets - Laying, Densifying And Finishing. Af_02/2022, Execution Of A Slab On The Ground, 15 Cm Thick, Using Sawn Wood Forms. Af_09/2021, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Subfloor In Mortar Mix 1:4 (Cement And Sand), Mechanical Preparation With A 400 L Concrete Mixer, Applied In Dry Areas On Slab, Not Adhered, Non-Reinforced Finish, Thickness 5Cm. Af_07/2021, Manufacture Of Formwork For Beams, With Sawn Wood, E=25Mm. Af 09/2020, Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Fork, In Resined Wood Sheet, Manufacture Of Formwork For Slabs, Assembly And Disassembly Of Solid Slab Formwork, Simple Ceiling Height, 4 Uses. Af 09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5 Ca-60 Steel, Slab Frame Of Conventional Reinforced Concrete Structure Using 4.2 Mm Ca-60 Steel - Assembly. Af_06/2022, Concreting Of Beams And Slabs, Fck=25 Mpa, For Solid Or Ribbed Slabs With Jericas In A Cable Elevator In A Multi-Storey Building Of Up To 16 Floors - Launch, Undercover With Plastic Blanket Covered By Aluminum Film, Vertical Transport Included. Af_07/2019, Lintel Cast In Situ In Concrete, Thickness Of *15* Cm. Af_03/2024, Plinth Molded In Situ In Concrete, Masonry For Sealing Ceramic Blocks Drilled Vertically Measuring 19X19x39 Cm (Thickness 19 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Plaster Or Single Putty In 1:2:8 Mortar, Manually Applied To Facade Panels With Gaps, 25 Mm Thick. Af_08/2022, Mechanical Preparation With 400 L Concrete Mixer, 25 Mm Thickness, Access By Scaffolding. Af_08/2022, Sliding Aluminum Window With 2 Panes For Glazing, With Glazing, Frame, Acetate Or Glossy Finish And Hardware. Exclusive To Alizar And Contramarco. Supply And Installation. Af_12/2019, Opening Aluminum Door With Paneling, With Trim, Fastening With Screws - Supply And Installation. Af_12/2019, Coating