Request For Quotation No. 197 Household Goods

Capillary Brass Tube, Diameter 1-3 Mm. Oxygen Filling Device. The Filling Device Is Intended For Filling Small Oxygen Cylinders With A Volume Of 2, 5, And 10 Liters With Oxygen. Of An Oxygen Cylinder With A Volume Of 40 Liters. Or 50 L. Outside Stationary Gas Stations. The Tube Should Bend And Take Any Shape. On Both Sides, The Connection Connectors Are 2 G3/4 Nuts. The Tube Is Made Of Brass. The Diameter Of The Tube Is Not Less Than 8 Mm. The Length Of The Tube Is Not Less Than 80 Cm. Gost 494-2014, Oxygen Reducer, Cylinder With Two Pressure Gauges Bko 50 12.5 Mini. The Largest Throughput, Not Less Than 50M3/Hour; The Highest Gas Pressure At The Inlet, Not Less Than 20 (200) Mpa (Kgf/Cm2); The Highest Working Pressure Of Gas, Not Less Than 1.25 (12.5); Mpa (Kgf/Cm2); The Coefficient Of Pressure Drop, R, Is Not More Than 0.3; Overall Dimensions, About 196X202x57 Mm. The Material Of The Case Is Brass. Intended For Lowering The Pressure Of The Gas Coming From The Cylinder And Automatically Maintaining The Set Working Pressure, Manometers Provide Control Of The Pressure At The Inlet And In The Working Pressure Chamber. The Reducer Should Have A Valid Verification. Gost 13861-89, Washbasin (Handwasher) Floor, Metal With An Enameled Or Stainless Sink, A Water Tank With An Electric Water Heater, A Cabinet Closed From The Bottom, The Front Side Of The Cabinet With A Door. Faucet, Gaskets, Drain, Hardware, Drain Plug (Installed In The Tank). Operating Manual. Gost 23695-94, An Oxygen Cylinder With A Capacity Of At Least 10 Liters Is Intended For Storing And Transporting Oxygen. The Oxygen Cylinder Must Be New And Equipped With An Oxygen Neck Ring, A Safety Cap, And A Support Shoe. The Cylinder Must Be Painted With Blue Enamel Paint And Marked With The Black Inscription Oxygen. Complete Body - Valve Vk-94-01. Wall Thickness, Mm – Not Less Than 4.4. Working Pressure Mpa (Kgf/Cm2) About 14.7 (150). The Test Hydraulic Pressure Is About 22.1 Mpa (225 Kgf/Cm2). Test Pneumatic Pressure 14.7 Mpa (150 Kgf/Cm2). Neck Thread Around W 19.2. The Material Of The Valve Body Is Brass. The Thread Of The Side Fitting Is Right. Temperature Range From -500C To +600C. Gost 949-73, Uncoated Kraft Paper For Packaging And Sterilization Of Medical Products, Brown Color, Width Not Less Than 60 Cm, Roll Length Not Less Than 50 M, Gost 8273-75, Waterproof Material For Roofing Works, Which Has A Self-Adhesive Layer With A Coating Of Bitumen And Polymers. The Outer Side Of The Material Has A Waterproofing Layer Made Of Aluminum Foil. The Internal Structure Of The Material Is A Reinforced Glass Fiber Fabric That Prevents Deformation When Subjected To Mechanical Stress. The Top Layer Is Aluminum Foil (At Least 30 Microns), The Bottom Is An Anti-Adhesion Film. The Material Is Delivered In The Form Of Rolls. The Thickness Of The Material Is Not Less Than 2.5 + 0.15 Mm. The Length Of The Roll Is Not Less Than 10 M. The Width Of The Roll Is Not Less Than 1 M Gost 30547-97, Upholstery Vinyl Leather, Fabric-Based. A Set For Upholstery Of Doors, Intended For Decorative Finishing, Heat And Sound Insulation Of Entrance Doors, As Well As Residential And Office Premises. The Set Includes: - Upholstery Material (Vinyl Leather Or Dermantine), Once. – Not Less Than 2.1X1.05 M, Color - Brown; - Insulation (Wadding Or Foam With A Thickness Of At Least 5 Mm) Once. – Not Less Than 2.1X1.05 M; - Furniture, Decorative, Metal Nails - At Least 50 Pcs., Oxygen Reducer, Cylinder With Two Pressure Gauges Bko 50 12.5 Mini. The Largest Throughput, Not Less Than 50M3/Hour; The Highest Gas Pressure At The Inlet, Not Less Than 20 (200) Mpa (Kgf/Cm2); The Highest Working Pressure Of Gas, Not Less Than 1.25 (12.5); Mpa (Kgf/Cm2); The Coefficient Of Pressure Drop, R, Is Not More Than 0.3; Overall Dimensions, About 196X202x57 Mm. The Material Of The Case Is Brass. Intended For Lowering The Pressure Of The Gas Coming From The Cylinder And Automatically Maintaining The Set Working Pressure, Manometers Provide Control Of The Pressure At The Inlet And In The Working Pressure Chamber. The Reducer Should Have A Valid Verification. Gost 13861-89