Request For Quotation Acquisition Of Household Goods

Unipump Electromagnetic Normally Closed Valve 1 1/4 32 Diameter Are Installed On Pipelines And, Depending On The Design, Open Or Close The Flow Of Liquid. The Electromagnetic Valve Consists Of A Brass Body And A Solenoid With A Core, Which Are Located Inside A Plastic Body. The Core Moves Freely In A Hermetically Sealed Tube Inside The Solenoid, A Membrane Is Installed That Opens Or Closes The Flow Of The Solenoid, Which Is Pulled In Or Pushed Out Of The Solenoid Medium - Water Or Other Liquids, Not Aggressive To Valve Materials, Compressed Air, Gas Viscosity Of The Working Medium - No More Than 20 Mm²/S Temperature Range Of The Working Medium - 0...+120 ºс Working Pressure - 0.5...16 Bar Power Network Parameters - ~ 220 ±10% V, 50 Hz Degree Of Protection – Ip65 Normally Closed 32 – Du (Diameter Of Conventional Passage) In Mm 1.25” – Diameter Of Threaded Connection Holes In Inches., Тен126с10/ Power – 2.7 Kw Voltage – 220 V, F3 (160.06.000) On Ae-25 Material – Stainless Steel, Copper, Teflon Tape 19X0.2 Mm 20 M Composition Fluoroplast, It Is Intended For Filling And Sealing Joints And Seams Between Products Made Of Glass, Ceramics, Wood, Pvc, Non-Corrosive Metal And Other Materials Used Both Indoors And Outdoors. It Has Excellent Adhesion To Most Building Materials. It Is Maximally Waterproof And Has Water-Repellent Properties. It Is Highly Elastic And Can Be Successfully Used For Sealing Movable Joints, For Example, When Sealing Corner And Deformation Joints In The Process Of Tiling Or Glazing. Small Packaging Is Affordable To A Wide Range Of Consumers, And Is Also Convenient For Minor Repairs. Dried Sealant Is A Safe Material. Technical Information Operates At Temperatures From -40 °C To +150 °C Composition: Acetoxysilicone Works Are Carried Out At Temperatures From +5 °C To +30 °C The Time Of Curing Until Unsticking Is 30 Minutes The Time Of Complete Curing Is 24 Hours Consumption: 1 Tube Per 90-100 Cm Seam Shelf Life: 24 Months Color: White Application Surfaces Should Be Cleaned Of Dirt And Dust, Degreased And Dried If Necessary. Porous Surfaces Are Recommended To Be Primed With A Moisture Barrier Primer Or Similar Primer. Evenly Fill The Seam With Sealant, Level It With A Wet Spatula For The Next 10 Minutes, Remove The Excess With A Rag Or Paper Napkin. Can Be Used For: Sealing Around Bathtubs, Sinks, Toilets, Etc.; Sealing Of Sewer Pipe Connections, Threaded Connections, Gaskets, Taps, Tees, Etc.; Sealing Seams When Facing With Tiles; Sealing Of Aquariums; Installation Of Glass In The Frame; Butt-To-Toe Glass Installations; Soundproofing Of Car Salons;