Bids Are Invited For Supply Of Equipment For Schools And Public Squares Belonging To The Municipality Of Águas Belas-Pe

Individual Seesaw - Manufactured With Carbon Steel Tubes Measuring At Least 2 ½ X 2 Mm; 2’ 2’ X 3 Mm; 1’ 1’ X 1.50 Mm. Carbon Steel Plate Of At Least 8 Mm; 4.75Mm; 3.75Mm; 3Mm; 2Mm. Solid Pins Are Used, All Bearings (Double Bearings). The Electrostatic Powder Painting Process, Mig Welding Is Used. Height 760 Mm Width 320 Mm Length 3500 Mm., Triple Swing - Structure Made With Round Steel Tube, Seat Made Of Metalon Tubes, Galvanized Chains And Brown Fasteners So That There Is No Wear On The Chain Links. The Electrostatic Powder Painting Process, Mig Welding Is Used. Height 2100 Mm Width 2800 Mm Length 1950 Mm, Carousel- Structure And Arch Manufactured With 1” Galvanized Tubes On 1.5Mm Plate. Axle In 2 ½” Galvanized Tubes On 2Mm Sheet Metal, With 2 Support Bearings. Seats In Sheet Steel. Electrostatic Epox Powder Painting In A High Temperature Oven. Height 800 Mm Width 1500 Mm Length 1500 Mm., Slide- Slide In Steel Sheet, Containing A Ladder For Climbing With 05 Steps In 25Mm Steel Tubes On 2Mm Sheet With Side Handrails And A Platform. The Slide Bed Is Made Of 18 Galvanized Steel Sheet, With A 6.0Cm Handrail On The Sides, And With Deceleration Steps At The End Of The Bed. Electrostatic Epox Powder Painting In A High Temperature Oven. Height 1400 Mm Width 500 Mm Length 2000 Mm., Rocker Comes And Comes - Made Of 1 ¼ Tube, 13 Plate And 2.25 Mm Wall, Locked To Form A Single Base, 2 Chairs Made With Metal, Measuring 20 X 40, With Support Rods, Solid Iron ½, Locked By Tube ⅞ On Plate 18, With Anti-Rust Treatment. Electrostatic Epox Powder Painting In A High Temperature Oven. Height 1400 Mm Width 1200 Mm Length 1200 Mm, 08/30/2024, Back And Forth Board - Made From 2\ X 2.65 Tube And 1 1/2 ” To Prevent Wear On The Chain Links. With Handle In 7/8 X 1.5 Tube, Fixed With 1 1/4 Zinc-Plated Screws. The Electrostatic Powder Painting Process, Mig Welding Is Used. Height 2000 Mm Width 1900 Mm Length 3000 Mm, Triple Walking Simulator - Manufactured With Carbon Steel Tubes Of At Least 2 ½ X 2 Mm; 2’ 1’ ½ X 1.50 Mm. Carbon Steel Plates Of At Least 4.75 For The Equipment Fixing Point And 1.9 Mm For The Foot Support Plate. Schedule 80 Drawn Carbon Steel Tube (73 Mm X 58.98 Mm). Use Solid Pins, All Bearings (Double Bearings), Phosphate-Based Surface Treatment; Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding, Parabout Anchor Of At Least 3/8’ X 2 ½’, Zinc Plated Screws; Injected And/Or Rubberized Plastic Finishes. Height 1160 Mm Width 2278 Mm Length 840 Mm, Triple Ski - Made With Carbon Steel Tubes Measuring At Least 2 ½ X 2 Mm; 1’ ½ X 3 Mm; 1’ ½ X 1.50 Mm; 1’ X 2.00 Mm. Drawn Carbon Steel Tube 2’ X 5, 50 Mm Schedule 80 (60, 30×49, 22). Metal Of At Least 30 Mm X 50 Mm Flat Bar At Least 3/16’ X 1 ¼’. Use Solid Pins, Round Flexible Rubber Stops (53Mm X 30Mm), Acetal Bushing, Parabout Anchor Of At Least 3/8 Built-In Internal Buffer In Injected Plastic Of At Least