Request For Quotation Service For The Purchase And Installation Of A Plate-Rotor Compressor

Service For The Purchase And Installation Of The Becker Dxlf 2.250-15 Plate-Rotor Compressor For Retrofitting Existing Equipment Of The Artificial Snowmaking System Gost 28567-90 Dxlf 2.250-15 Plate-Rotor Compressor. Max. Consumption: Not Less Than 247 M³/Hour. Max. Pressure: Not Less Than 1.8 Bar. Power: Not Less Than 15 Kw. Voltage: 380 V. Compressor Type: Plate-Rotor. Noise Level: No More Than 84 Db. Inlet Pipe: Not Less Than 50 Mm. L X W X H: 129X64x42 Cm. Weight: 165 Kg. The Pump-Compressor Has A Monoblock Design. The Cylindrical Rotor Is Eccentrically Installed On The Extended Shaft Of The Electric Motor. The Rotor Has Inclined Grooves In Which The Self-Lubricating Plates Slide Freely. Plates Are Made Of Composite Graphite. When The Rotor Rotates, The Radial Plates Are Pressed Against The Cylindrical Body Due To Centrifugal Force And Form Cells Of Variable Volume. As The Volume Of The Cell Increases, Gas Is Sucked In From The Pumped Volume. As Soon As The Volume Of The Cell Begins To Decrease, It Is Disconnected From The Suction Window. Further, The Volume Of The Cell Decreases - The Gas Is Compressed. When The Volume Of The Cell Is Minimal, It Is Connected To The Injection Window, And The Compressed Gas Enters The Injection Line. Low Noise Level.