Tenders Are Invited For Improvement Of The Szypliszki Forest Lodge And Landscaping

The Subject Of The Order Is The Improvement Of The Foresters Lodge Of The Szypliszki Forest With Inventory No. 110/739 And Development Of Adjacent Areas, Including: Construction Of The Msp, Fence And Garbage Shelter. A Detailed Description Of The Subject Of The Order Is Included In The Bill Of Quantities And Technical Documentation Constituting Annexes No. 2 And 3 To The Swz. The Scope Of The Order Is In Particular: A) Improving And Insulating The Slope And The Ceiling Of The Last Floor, Combined With Replacing The Roofing. And Roof Equipment: • Supplementing Or Replacing The Old Insulation Of The Ceiling In The Attic Slopes With Mineral Wool. 18 Cm With Coefficient Λ = 0.035 W/(M*K), Tightening Additional Battens And Insulating With Mineral Wool Thickness. 5 Cm With A Coefficient Of Λ = 0.031 W/(M*K),• Laying A Roof Foil With High Vapor Permeability, And Making Roof Battens,• Replacing The Roof Covering With Sheet Metal Shingles Made Of Steel Sheet Coated In Matt Black, E.G. Janosik Type , Combined With The Implementation Of New Sheet Metal Flashings (Including Chimney Flashing) And Roof Assembly Elements Such As Chimney Sweep Benches, Railings, Roof Hatch, Etc., And Protection Against Nesting By Wild Birds, • Supplementing Or Replacing The Old Insulation Of The Ceiling Above The Attic With Mineral Wool. 18 Cm With Coefficient Λ = 0.035 W/(M*K) • Making A New Soffit For Gables And Eaves From Pine Shuttering Boards Thick. 22 Mm Wide, 140 Mm (The Formwork Should Be Impregnated With A Wood Impregnation Preparation, Such As Glazing) Twice, The First Time Being The Entire Boards Before Screwing, • Installation Of New Gutters (⌀ 125 Mm), Downpipes (⌀ 100 Mm) Made Of Coated Steel Sheet In The Color Roof And Installation Of Inspection Wells In The Band And Collecting All Gutters Into The Existing Rainwater Tankb) Thermal Modernization Of External Walls Combined With The Renovation Of The External Finishing Of The Building And The Replacement Of Windows And External Doors: • Insulating The External Walls Of The Ground Floor And Attic With Styrofoam Thickness. 10 Cm With A Coefficient Of Λ = 0.033W/Mk - Insulation In A Seamless Building Insulation System (Etics) With Thin-Layer Silicone Structural Plaster, • Insulation Of The External Walls Of The Underground Floor With Styrodur Polystyrene Foam, Thickness. 10 Cm And Plinth With Aqua Styrofoam Thickness. 10 Cm With Coefficient Λ = 0.033W/Mk - Insulation In A Seamless Building Insulation System (Etics) With Thin-Layer Structural Mosaic Plaster Based On Resins With Priming, • Replacement Of External Door Joinery With Reinforced, Insulated Wooden Doors With Heat Transfer Coefficient Umax = 1 .3 W/M2*K • Replacement Of Window Frames With Processing Of Glyphs (On The Inside, Restoring The Original Condition, Including Painting) With A New One Made Of Glued Laminated Wood With A Heat Transfer Coefficient Umax = 0.90 W/M2* K With The Use Of Pressure Air Vents (1 Air Vent In Each Room, Excluding Bathrooms), The D