Tenders Are Invited For Elimination Of Architectural And Information And Communication Barriers In The Building Of The District Office In Świecie

Part I Of The Order: Delivery And Installation Of A Passenger Lift, Including Dismantling The Existing One And Installation Of An Actuator And Controller For Automatic Door Opening.1. The Subject Of The Order Is The Performance Of Construction Works For The Project Of Replacing The Internal Elevator In The Building Of The District Office In Świecie, At Ul. Gen. Józefa Hallera 9, 86-100 Świecie, On Plots No. 647/223 And 647/224, In Świecie, And Performing Monthly Free Maintenance Inspections Of The Device During The Warranty Period In Accordance With Legal Regulations And Determining The Annual Service Life Of The Device. Designed Internal Elevator With Hydraulically Driven, With Engine Room, With A Lifting Capacity Of 900 Kg. Existing Elevator Shaft, Reinforced Concrete Structure, Placed On A Foundation. Additionally, The Entrance Door To The Building Is Designed To Open Automatically From Ground Level. 2. Technical Data Of The Designed Internal Elevator In The Building: 2.1 Technical Data (According To Pn-Iso 9836:2022): - External Length Of The Shaft 2.72 M - External Width Of The Shaft 2.44 M - Cabin Width 1.50 M - Cabin Depth 1 .40 M - Lifting Height ~10.08 M - Number Of Stops 53. Construction And Material Solutions Of The Designed Investment 3.1 Internal Elevator For Disabled And Blind People - Lift - Passenger, - Lifting Capacity - 900 Kg, - Number Of Stops - 5, - Number Of Accesses – 5 (Arranged On Both Sides), - Speed – Up To 0.63 M/S – Adjustable Over The Entire Range, - Lifting Height - ~10.08 M, - Cabin Doors – 2 Pcs., Automatic Telescopic 2At, Dimensions 900X2000 M, Made Of: Satin Stainless Steel, Equipped With An Adjustable Drive And A Light Curtain, - Shaft Doors - 5 Pcs., Automatic Telescopic 2At, Dimensions: 900X2000 Mm, Made Of: Satin Stainless Steel, - Ei Resistance - No Fire Resistance Class, - Cabin Dimensions – 1400X1500 Mm, - Pass-Through Crane Cabin At An Angle Of 90°: - Cabin Equipment: - Control Panel Should Be Mounted At A Height Of 80-120 Cm Above The Floor And At A Distance Of 50 Cm From The Corner Of The Cabin, On The Side Wall, Made Of Highly Resistant Stainless Steel Against Damage, Equipped With: Electronic Digital Floor Display And Travel Direction Arrows, Illuminated, Convex Buttons With Braille Graphics, Light And Sound Signaling Of Cabin Overload, Should Be Equipped With Additional Markings For Blind And Visually Impaired People And Voice Information, Exit Stop Button It Should Protrude 5 Mm (+/- 1 Mm) From The Building Above The Other Buttons (Green Color Recommended), - Lighting - Placed In The Led Ceiling, - Ceiling - Made Of Stainless Steel, - Battery Emergency Lighting - Min. 2 H, - Round Stainless Steel Handrails On Both Sides Of The Cabin At A Height Of 90 Cm, - Mirrors Mounted On The Walls Opposite The Entrance Door, Located At A Maximum Height Of 40 Cm From The Floor Level, - Fan - Silent, Automatically Activated, - Skirting Boards - Bumpers Made Of Stainless Steel, - Vox - Voice Information System In