Tenders Are Invited For Load-Bearing Structure Design Services – Ssb Conversion And Modernization Hv - Structural Planning

Load-Bearing Structure Design Services – Ssb Conversion And Modernization Hv - Structural Planning. The Main Administration Is Divided Into 3 Parts Of The Building, Which Extend In A West-East Direction And Were Built At Different Times. The Three Parts Of The Building In Its Construction Are The Head Building, Which Was Attached To The Main Workshop, The Middle Building, Which Is Attached To The Western Gable Side Of The Head Building, And The Administration Building, Which Is Attached To The Middle Building. As Part Of The Intended Construction Project, The Front And Middle Buildings Represent Module 1 And The Administration Building Represents Module 2. In Module 1, The Floor Slab Of The Tes Garage Must Be Renovated. A Feasibility Study Of The Structural Planning Was Carried Out In 2022. Further Possible Measures Are Listed Here. In Module 2, The Feasibility Of Structural Planning Will Be Examined In The Course Of Introducing The Vehicle Training Over Two Floors And Demolishing The Interior Walls To Create Spacious Central Zones. It Is Intended To Be Commissioned In Sections And In Stages. There Is No Entitlement To Further Assignment. First, The Basic Planning Services Of Structural Planning Lph 1 (Basic Determination) In Accordance With Hoai Or Decision Document (Eu Construction) In Accordance With Rbbau For Module 1 And Module 2 Should Be Commissioned. Further Orders Are Made By Written Notification From The Client. After Stage 1, A Decision Is Made As To Whether Module 2 Should Be Implemented. If A Decision Is Made For Module 2, A Gradual Commissioning Will Take Place Together With Module 1. In This Case The Modules Are Merged. The Plan Is To Award Service Phases 1,2,3,5,6 In Stages According To Hoai. If Necessary, Both The Lph 4 Of Structural Planning According To Hoai And Special Services Of Structural Planning According To Hoai Can Be Commissioned. Different Commissioning Options Are Also Possible. The Planning Does Not Take Place During Construction. At The Time Of Construction, The Three Buildings Were No Longer Inhabited. It Is Expected That All Employees And Special Areas Will Move Out Of The Headquarters By Mid-2026. The Planning Should Be Finalized By The 1St Quarter Of 2027 And Construction Should Begin In The 2Nd Quarter Of 2027. The Construction Project Is Scheduled To Be Completed By The End Of Q1 2029 (Handover Of Keys). The Commissioning And Implementation Of The Planning And Execution Are Based On: - The Guidelines For The Implementation Of Federal Construction Tasks (Rbbau 2022) - The Guidelines For The Participation Of Freelancers (Rift Tables, State, 2022). Facades: The Glazed Facade Surfaces Are To Be Created As Light Metal Element Windows Or Post-And-Beam Constructions. Alternatively, A Wood-Aluminum Window Construction Can Be Used. The Metal Surfaces Must Be Powder-Coated. Opening Sashes In Alternating Sequences With Narrow Fixed Glazing. The Facade Doors And Sections Of Large-Format Fixed Glazing Can Be Planned With Opening Sashes And Partially Openable Skylights According To The Intended Use