Tenders Are Invited For Engineering Services – Dlr Augsburg-Göggingen - Institute For Test And Simulation For Gas Turbines // New Construction Of The Hall For Rotary Test Stands And The Mtcv Hall - Technical Equipment Services, System Groups 1, 2, 3, 7 (Here In Particular: Media Supply Systems [Hydrogen] And Laboratory Technology Annexes) And 8, Service Phases 2-9 In Accordance With §§ 53 Ff. Hoai.

Engineering Services – Dlr Augsburg-Göggingen - Institute For Test And Simulation For Gas Turbines // New Construction Of The Hall For Rotary Test Stands And The Mtcv Hall - Technical Equipment Services, System Groups 1, 2, 3, 7 (Here In Particular: Media Supply Systems [Hydrogen] And Laboratory Technology Annexes) And 8, Service Phases 2-9 In Accordance With §§ 53 Ff. Hoai.. The Dlr Institute For Test And Simulation For Gas Turbines In Augsburg-Göggingen Researches New Engine Technologies By Coupling Numerical And Experimental Methods To Validate Innovative Solution Approaches. The Technical Challenges Are High Speeds, High Temperatures, High Pressure Conditions And The Associated Complex Load Spectrums Of The Engine Components In Conjunction With Increased Service Life Requirements. For The “New Construction Of The Hall For Rotor Test Stands And The Mtcv Hall”, A Feasibility Study, Which Is Attached To This Vgv Tender As Tender Document G_Plan And Information Documents, Was Carried Out With Two Different Variants. Variant 1 Was Further Developed After Selection. The New Building/Extension Dlr Sg That Is The Subject Of The Tender Will Be Built In The Vicinity Of The Institutes New Building. The Construction Of The Hall For Rotary Test Stands And The Mtcv Hall Is Oriented Along The East-West Access Axis Of The Campus And The New Research Avenue. The Building Will Be Positioned On The Southern Part Of The Property. The Urban Planning Concept Envisages Main Traffic Access Via A Street To The South. The Location Of The Two New Halls Creates New Space For Research And Enables New Synergies Between Research And Industry. The Extension Building Will Be Accessible On Foot From The South, And Access And Delivery Will Also Be From The South. The Internal Access Takes Place Via The Connecting Building. While The Hallway On The Ground Floor Serves As A Path Connection And Distributor Between The Front Building And The Hall, The Accessible Media Hallway On The First Floor Is Used To Supply The Hall With Technical Supplies. The Two Halls Are Combined Into One Building And Structured Clearly And Simply. The New Building Can Be Divided Into Two Clearly Visible Areas, These Are The Two Test Halls And The Technology Block. The Hall For Rotary Test Stands Includes A Test Room For Sec, A Test Room For Busch, A Test Room For Grace And A Spin Test Stand. Three Spring Or Vibration Foundations Are Provided For The Test Stands. All Test Stands Are Equipped With A Rear Control Room And A Crane System. A Gallery Above Creates Additional Storage Space. Two Workshops And The Delivery Zone Will Be Located In The Southern Area Of ​​The Hall. The Mtcv Hall Will Be Equipped With Three Flow Velocity Test Stands And Three Uhcv Test Stands, And Two Additional Control Rooms Will Be Spatially Integrated. The Delivery Zone Is Located In The South Of The Hall. Separated From A Central Aisle, The Test Stands Are Arranged In A Two-Hip Arrangement. On The Ground Floor, The Technical Block Contains Technical Areas For Electrical Equipment, Two Storage Areas, Sanitary Facilities, An It Room And A Meeting Room. An Inner Courtyard Provides Additional Natural Lighting For The Meeting Room. On The First Floor Of The Technical Block, Additional Technical Areas For Ventilation Systems, Heating, Cooling And Cooling Water Are Included