Request For Quotation Household Goods Bayanaul

Gland Packing As (Dry Asbestos Packing) Is Made In Accordance With Gost 5152-84 In The Form Of An Elastic Non-Graphitized Cord Of Round Or Square Section Ф 10 Mm, Woven From Asbestos Thread. Stuffing Is Used To Seal Movable And Immovable Joints In Machines And Units. It Has High Resistance To Wear And At The Same Time Provides High Tightness, Minimal Friction Force In The Contact Zone Of The Packing With Moving Parts And Resistance To Neutral And Aggressive Liquid And Gaseous Media. Features: It Is Unloaded In Bays With A Weight Of: 20 Kg Warranty Period Of Storage: 5 Years From The Date Of Manufacture Application: Fittings, Pumps Working Environment: Neutral And Aggressive Liquid And Gaseous Environments / Liquid And Gaseous Ammonia Ph: 5-14 Maximum Permissible T.°C: 300/Ot -70 To 150 Maximum Permissible P, Mpa: 5.0/4.5 Maximum Permissible Sliding Speed, M/S: 2.0 Density, G/Cm3, Not Less Than: 0.5, Package Weight 5.5 Kg Dimensions, See 150X2x2 The Diameter Of The Circumscribed Circle 25 Mm Length 1500 M Material Carbon Steel Type Construction Scrap The Type Of Cross-Section Is A Circle, Characteristics And Description The Main Ones Purpose Of The Mixer For The Bath Type Of Mixer (Faucet) Single Lever Warranty Period 12 Months Coverage Nickel Condition New User Characteristics Color Chrome Single-Lever Bath Mixer., Characteristics And Description Type Of Lubricant Organic Color White Appearance Homogeneous Ointment Droplet Temperature, °С, Not Less 78 Solidol Fat Solidol Is A Water-Resistant Hydrated Calcium Grease, Which Is Used For Application To Friction, Sliding And Rolling Joints Of Cars, Special Vehicles, Equipment Operating In The Temperature Range From -25 To +65 °C. Solidol Can Work In Bearings And Hinges Of Powerful Mechanisms At Temperatures Up To -50 °C. Solidol Is Recommended For Use As A Multipurpose Grease For Agricultural, Construction, Utility Machinery, Automobiles, And Industrial Equipment. It Is Suitable For Applying Friction, Sliding, And Rolling To Bearings, Including Powerful Mechanisms. Solidol Can Be Used For Equipment Operating In Harsh Conditions (High Humidity, Extremely Low Temperatures, Etc.). It Is Also Suitable For Lubrication Of Low-Load Hard-To-Reach Sliding Pairs (For Example, Pedal Bushings, Door Hinges, Lock Elements, Various Levers In Cars)., Characteristics And Description Purpose Of The Mixer For The Kitchen Sink Type Of Mixer (Faucet) Contactless Mixer Body Material (Faucet) Bronze Coverage Brass The Form Of The Effusion Traditional Rotary Spout No Assembling Built-In Installation Method Horizontal Number Of Mounting Holes 1 Type Of Eyeliner Flexible, Characteristics And Description The Main Ones Material Aluminum User Characteristics Max Door Width 90 Mm Package Weight 1 Kg Door Weight 40 Kg Dimensions, See 25X7x8 Lever Length 210 Mm/M Frost Resistance To, Degrees. -35 Coverage Silumin Working Resource, Cycles 400,000 Adjusting The Closing Speed Yes Adjusting The Flap Speed Yes Color Silver, Characteristics And Description Oil Frost-Resistant Gloves (Nms) With A Frost-Resistant Polyvinyl Chloride Coating, Universal Protective Gloves On A Knitted Basis Made Of Cotton Yarn (100%) With A Jersey Insulation, With Antibacterial Impregnation Provide The Hands With The Highest Possible Level Of Comfort And Moisture Absorption., Characteristics And Description Material Pvc Description 10Th Knitting Class, 7-Thread. Yarn Composition - 80% Cotton, 20% Synthetics. Long Fingers, Long Cuff With Good Wrist Coverage, High-Quality Overlock With Bank Elastic. The Palm Part Is Covered With A Dot Pvc Polymer Coating With A Plasticizer, Which Provides Firmness Of Attachment, Elasticity, And Good Grip. In The Most Loaded Places - On The Pads Of The Fingers - Pouring In A Continuous Layer. The Weight Of A Pair Of Gloves Is About 67 Grams., Characteristics And Description Disc For 125* 0.8 With The Help Of A Cutting Wheel Attached To The Spindle Of An Angle Grinder (Ushm), Or, As It Is Popularly Called - Bulgarki, It Is Possible To Cut Metal Sheets Of Different Thicknesses, Profiles, Corners, Strips, Wire, Wire Rod And Knots Of Completely Unusable Parts Equipment A Cutting Wheel For A Grinder Is An Excellent Tool Not Only For Cutting, But Also For Grinding Products Made Of Carbon And Stainless Steel, Non-Ferrous Metals And Their Alloys, As Well As Non-Metallic Materials. A Real Professional Knows How To Correctly Choose The Right Tool For The Usm To Perform A Specific Task, And Can Perform The Work Quickly, Accurately And Qualitatively, Observing The Safety Rules When Working With Abrasive Discs.