Request For Quotation Purchase Of Spare Parts For The Maz-533702 Automobile Crane (Кс-45729А-0-(01)

High-Pressure Hose (Rvd) Rvd 20-23-1050 M33: 2 On The Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Rvd Sleeve Is A High-Pressure Sleeve With Metal Braids Pressed With Fittings At The Ends. Used In Hydraulic Systems Of Medium And High Pressure To Supply Working Fluid From Hydraulic Distributors To Actuators. The Fittings At The Ends Of The Sleeve Have A Spherical Nipple (Apple) And A Union Nut. The Sealing Angle On The Cone Is 37°. Metric Cylindrical Thread., Onk-160S Type Safety Device For Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Onk 160S 100 Crane Load Limiter Is A Device That Is Installed On The Rotary Platform Of Jib Cranes. This Device Allows You To Prevent Overloading, Damage And Overturning Of The Crane When Moving The Weight., High-Pressure Hose (Hvd) Rvd 12-25-1050 M22: 1.5 For The Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Rvd Sleeve Is A High-Pressure Sleeve With Metal Braids Pressed With Fittings At The Ends. Used In Hydraulic Systems Of Medium And High Pressure To Supply Working Fluid From Hydraulic Distributors To Actuators. The Fittings At The Ends Of The Sleeve Have A Spherical Nipple (Apple) And A Union Nut. The Sealing Angle On The Cone Is 37°. Metric Cylindrical Thread., High-Pressure Hose (Rvd) Rvd 12-25-650 M22: 1.5 For The Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Rvd Sleeve Is A High-Pressure Sleeve With Metal Braids Pressed With Fittings At The Ends. Used In Hydraulic Systems Of Medium And High Pressure To Supply Working Fluid From Hydraulic Distributors To Actuators. The Fittings At The Ends Of The Sleeve Have A Spherical Nipple (Apple) And A Union Nut. The Sealing Angle On The Cone Is 37°. Metric Cylindrical Thread., High-Pressure Hose (Rvd) Rvd 25-25-780 M42: 2 On The Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Rvd Sleeve Is A High-Pressure Sleeve With Metal Braids Pressed With Fittings At The Ends. Used In Hydraulic Systems Of Medium And High Pressure To Supply Working Fluid From Hydraulic Distributors To Actuators. The Fittings At The Ends Of The Sleeve Have A Spherical Nipple (Apple) And A Union Nut. The Sealing Angle On The Cone Is 37°. Metric Cylindrical Thread., Hook Lift Limiter Assembly For Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Hook Lifting Limiter Is A Non-Contact (End) Switch That Opens The Electrical Circuit During Lifting Of The Load And Loosening Of The Spacer Cable., Vp15 Type Limit Switch For Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Limit Switch Type Vp15 Is Intended For Switching Electrical Control Circuits Of Alternating Current Voltage Up To 660V With A Frequency Of 50 Hz And 60 Hz, Direct Current Voltage Up To 400V. The Nominal Switching Current Is 10A. The Vp15 Switch Must Have A Degree Of Protection Of At Least Ip54 - Complete Protection Against Dust Penetration And Accidental Splashes Of Water Or Oil At Any Angle. The Body Material Is An Aluminum Alloy (Silumin). The Material Of The Contact Group Is Electrotechnical Copper With A Galvanic Coating. The Entry Of External Wires Must Be Carried Out Through A Hermetic Conduit (Seal Type Mg20x1.5)., The Lower Frame Is Fixed With Components For The Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189, Manufactured In 2012). The Lower Frame Is A Supporting Non-Rotating Part Of The Truck Crane, Which Is Installed Directly On The Car Chassis. This Is A Rigid Structure Capable Of Taking On The Main Load That Occurs During The Operation Of A Mobile Crane. Steel Beams Of A Special Box Section, From Which The Frame Is Made, Give The Frame The Ability To Withstand Heavy Loads. The Brand Of Metal From Which The 2-G-9 Frame Is Made, With A Thickness Of At Least 1.5 Cm., Support Turning Device (Opu) For The Maz-533702 Automobile Crane (Кс-45729А-0-(01) Chassis No. Yзм533702с0011189). The Ks-45712.17.000 Rotary Support Is A Large-Sized Bearing Capable Of Receiving A Combined Load And Is Intended For The Rotation Of The Rotary Part Relative To The Non-Rotating Part. The Support-Rotary Device Transfers Loads From The Rotary Platform To The Non-Rotating (Running) Part Of The Machine And Ensures The Rotation Of The Rotary Platform With The Working Equipment.