Bids Are Invited For Acquisition Of 01 (One) Lifting Belt, 01 (One) Separation Belt And 01 (One) Vertical Press, Intended For The Solid Waste Sorting Unit (Utr), According To Transfer Instrument N. 5007703/2023 And Specifications Of These Terms Of Reference, In Service Of The Municipal Secretariat Of Agriculture, Livestock And Environment Of The Municipality Of Sete Quedas/Ms.

Waste Lifting Belt With A Minimum Length Of 10,000 Mm And A Width Of 1380 Mm; With Fixed Type Flights And Hopper With Metallic Structure Lining The Gap In The Lower Part Of The Conveyor. Monoblock Type Structure Built With Steel Plates. Flat Base In Steel Plate For Belt Sliding. Usable Canvas Width 1000Mm And Flight Width 800Mm And Minimum Height 50Mm. Equipped With A Minimum 3 Hp Gearbox, Controlled Via A Frequency Inverter And Can Be Adjusted Using A Potentiometer To Regulate Its Speed From 0 To 8 M/M. With Trigger System For Emergency Shutdown For Equipment Operators. Canvas With Flights And Pressed Clamp Type Splice For Lifting System And Side Seals. Electrostatic Painting. The Lifting Belt Must Be Compatible And Installed/Coupled With The Flat Separation Belt With Dimensions Of: 1010Mm Height Minimum Specification: Minimum Size Of 10500Mm, Equipment With Metal Structure With Anti-Corrosion Coating, Equipped With Electric Gear Motor Of At Least 1Kw Product Dimensions: 1010Mm Height X 1380Mm Width Carrier. Rubber Side Protection To Prevent The Accumulation Of Waste On The Conveyor Belt. Flat Base In Sheet Steel For Sliding The Belt. System For Variation In Conveyor Belt Speed, Through Frequency Inverter And Potentiometer Controlling Belt Advance, Determining Speed ​​For Operation From 0 To 8 Meters Per Minute. With Trigger System For Emergency Shutdown For Equipment Operators. Bearings With Adjustment System For Conveyor Belt Alignment. Machined And Galvanized Traction Rollers. Electrostatic Painting. Compatible And Installed On A 1380Mm Wide Waste Lifting Belt, Vertical Baler. Minimum Specifications: With Safety Door, Pressing Box In Minimum Dimension (Width 1000Mm; Height 1400Mm; Depth 600Mm); Three-Phase Motor Of At Least 5 Hp; Minimum Nominal Hydraulic Power Of 15 T; Steel Sheet Structure 1020 Or Higher With A Minimum Thickness Of 3/16?; Electrostatic Painting; Voltage 220V Three Phase; Direct Engine Activation; Security Systems That Meet Current Abnt Nbr Standards And Regulatory Standards (Nrs).; Emergency Devices; Control Panel With Fault Detection Of Its Components; Mechanical Retention System; Feed Funnel Mouth Of At Least 500Mm X 1000Mm. The Equipment Must Be Delivered With Hydraulic Oil And Other Necessary Accessories For Full Operation After Installation. The Equipment Must Be Delivered With A Bale Removal And Handling Cart Compatible With The Equipment. New Equipment With 12 Month Warranty After Installation.