Bids Are Invited For Registration Of Prices For Future And Eventual Acquisition Of Outdoor Gym Equipment For The Municipality Of Maravilha – Sc.

Adduction / Abduction Of Legs: Manufactured With Carbon Steel Tubes Measuring At Least 31/2 X 3.75 Mm; 2 X 2Mm; 11/2 X 1.50Mm; 1 X 2Mm. Schedulle 80 Drawn Tube. Carbon Steel Plates With A Minimum Of 4.75 Mm; 1.90Mm. Injected Plastic Cap Of At Least 31/2. Anchor With Flange Of At Least 230 Mm X 3/16, Laser Cut With Zinc-Plated Fixing Screws Of At Least 5/8 3/8. Screws And Nuts D, Simple Elliptical: Manufactured With Carbon Steel Tubes Of At Least 2’’1/2 X 2 Mm. 2’’X 2 Mm 1’’ ½ X 3 Mm. 11/2 X 1.50 Mm. 1’’ X 2Mm. Carbon Steel Sheets With A Minimum Of 1.90 Mm. 4.75Mm. Metal Of At Least 30Mm X 50Mm X 2Mm. Flat Bar Of At Least 3/16’’ X 1’’1/4. Parabolt Anchor Of At Least 3/8?. Built-In Internal Plug In Injected Plastic Measuring At Least 2’’1/2 With Spherical Finish. Zinc Plated Fixing Screws And Nuts. Solid Pins Are Used, All Bearings (Double Bearings). Phosphate-Based Surface Treatment. Colored Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding, Injected Plastic And/Or Rubberized Finishes., Double Elliptical: Manufactured With Carbon Steel Tubes Of At Least 21/2 X 2 Mm. 2’’X 2 Mm 11/2 X 3 Mm. 11/2 X 1.50 Mm. 1 X 2Mm. Carbon Steel Sheets With A Minimum Of 1.75Mm. Metal Of At Least 30Mm X 50Mm X 2Mm. Flat Bar At Least 3/16 X 11/4. Parabolt Anchor Of At Least 3/8?. Built-In Internal Plug In Injected Plastic Of At Least 21/2 With Spherical Finish. Zinc Plated Fixing Screws And Nuts. Solid Pins Are Used, Backrest: Manufactured: With Tubes And Plates In High Resistance Carbon Steel, In Dimensions Of 31/2, 2, 11/2 And 1 With Minimum Thicknesses Of 2.00 Mm; Tubular Holes: Upper And Lower Ends Armored In Plate 14, Making It Insensitive To Water Penetration; Welding: Mig Process; Painting: Subjected To Special Surface Treatment For The Electrostatic Epoxy Method Using Mixtures Of Resins In Polyester With High Resistance To Weathering; Components: Polypropylene; Screws, Guidance Plate: Guidance Plate That Describes How To Use The Devices, The Appropriate Stretching To Be Performed Before And After Exercises And Various Other Important Information. Manufactured: With Round Carbon Steel Tubes Of At Least 2 X 2.00Mm, Plate Contour Frame In Carbon Steel Tubes Of At Least 11/4 Galvanized Sheet Plate With A Minimum Thickness Of 0.80Mm And A Minimum Size Of 1000X2000mm. Covers In Carbon Steel Sheet At A Minimum Of 2Mm This, 08/23/2024, Double Leg Pressure: Manufactured: With High Strength Carbon Steel Tubes And Sheets, 2 And 3/16 With Minimum Thicknesses Of 2.00 Mm; Tubular Holes: Upper, Lower And Furniture Ends Armored In Plate 14, Making It Insensitive To Water Penetration; Using Solid And Machined Shafts For Double Bearings (Type Zz); Welding: Mig Process; Painting: Subjected To Special Surface Treatment For The Electrostatic Epoxy Method Using Resin Mixtures, Handle With Breastplate: Description: Equipment Produced From High-Resistance Carbon Steel Tubes And Sheets, 2”, 11/2, 1 And 3/ 16 With Minimum Thicknesses Of 2, Making It Insensitive To Water Penetration; Using Solid And Machined Shafts For Double Bearings (Type Zz); Welding: Mig Process; Painting: Subjected To Es Treatment