Bids Are Invited For Future And Possible Acquisition Of Outdoor Gym Equipment

Individual Arm Adduction And Abduction Individual Arm Adduction And Abduction: Strengthens The Shoulder Muscles. Material: Round Carbon Steel Tubes Measuring At Least 3 ½ X 2.00 Mm; 2 X 2.00 Mm; 1 ½ X 1.50 Mm And 1 X 1.50 Mm. Carbon Steel Plates Of At Least 6.35 Mm; 4.75Mm; 3.75 Mm And 2.00 Mm. Welding: Mig Type. Finishes: Reduced Tubes, Avoiding Splices And Providing Ergonomic Grip. Double Injected Pins Are Used, All Bearings (Double Shielded Bearings). Round Flexible Rubber Stops (53Mm X 30Mm). Built-In Internal Plug Made Of Injected Plastic Measuring At Least 3 ½, With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. Bench And Back With Dimensions Of 335 Mm X 315 Mm And Printed With Rounded Edges. Zinc Plated Screws, Washers And Fastening Nuts. Acetal Bushing. High Fixation Destructive Reflective Sticker With Identification, Instructions For Use And Manufacturer Data. Painting: Treatment With A Phosphate-Based Submerged Bath. Electrostatic Powder Deposition System With Colored Thermosetting Polyester Resin Protective Film. Colors To Be Defined.Fixing: Anchor With Flange Of At Least 230 Mm X 3/16, Laser Cut With Zinc-Plated Fixing Screws Of At Least 5/8 Drawing Of At Least 3/8, Zinc-Plated Screws, Washers And Fastening Nuts. Individual Skiingindividual Skiing Improves Cardiorespiratory And Cardiovascular Capacity, Balance And Motor Coordination. Material: Round Carbon Steel Tubes Of At Least 2 1/2 X 2.00 Mm; 1 ½ X 3.20 Mm. Schedule 80 Drawn Carbon Steel Tube (60.30 Mm X 49.22 Mm). Metal 30 X 50 X 1.50 Mm. Carbon Steel Sheets Of At Least 3.00 Mm And 1.90 Mm. Welding: Mig Type. Finishes: All Bearing Pins Are Used (Double Shielded Bearings). Round Flexible Rubber Stops (53Mm X 30Mm). Built-In Internal Plug In Injected Plastic Of At Least 2, With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. Screws, Instructions For Use And Manufacturer Data. Painting: Treatment With A Phosphate-Based Submerged Bath. Electrostatic Powder Deposition System With Colored Thermosetting Polyester Resin Protective Film. Colors To Be Defined.Fixing: Parabout Anchor Of At Least 3/8 X 2.00Mm; 3 ½ X 2.00 Mm; 1 ½ X 4.25 Mm; 1 ½ X 2.00 Mm. Carbon Steel Plates Of At Least 6.00 Mm. Welding: Mig Type. Finishes: Bushing System With Limitation, Eliminating Limb Trapping. Double Shielded Bearings Are Used. Built-In Internal Plug In Injected Plastic Measuring At Least 3 ½ And 2, Both With A Spherical Finish Following The External Dimension Of The Tube. Injected And/Or Rubberized Plastic Finishes. Seat And Back Made Of Rubber (Vulcanized) With Dimensions Of At Least 335Mm X 315Mm. Zinc Plated Screws, Washers And Fastening Nuts. High Fixation Destructive Reflective Sticker With Identification, Double Diagonal Rotationdouble Diagonal Rotation Increases Flexibility And Mobility Of The Shoulder Joint.Material: Round Carbon Steel Tubes Of At Least 3 ½ X 2.00 Mm; 1 X 1.50 Mm And 3/4 X 1.20 Mm. Tube