Bids Are Invited For Future And Eventual Hiring Of A Company For The Construction Of A Double Metal Shelter (Bus Stop) 2 Modules, On Rua Moysés De Paula Ferreira, Residencial Araguaia, For Students From The Municipal Public Network, Aiming To Meet The Needs Of The Municipal Department Of Management And Planning. According To Conditions Established In The Terms Of Reference, Project And Spreadsheets, Prepared By The Engineering Department Of The Municipality Of Nerópolis.

Construction Of Double Metal Shelter (Bus Stop). Approximate Measurement 6.50 (L) , Fck 20 Mpa, With Dimensions (20 X 20 X 30Cm). Each Stop Must Have 04 (Four) Blocks; Each Block Will Receive A Support Column In A Metallic Structure With Anchors.Metallic Stop Fabrications: The Stops Must Be Manufactured In A Modular Form, In Steel Profiles, With Dimensions According To The Project. Structures Of The Main Columns: The Structure Of The Rear Main Columns Must Be Executed In 4” Steel Tube (Or 100X100mm), Plate 13 (2.25 Mm). Measures According To Annex Project. The Front Main Columns Must Be Made From 2” Steel Tube (Or 50X50mm), 25 Mm), Their Fixation To The Ground Will Be Done Using Anchor Bolts Into A 1.3/4 Tube, Concreted To The Ground. Its Welded Connections Forming A Rigid Assembly With Sufficient Resistance To Wind Action. Coverage: The Coverage Must Have The Structure Made Of 02 Main Steel Tubes 2” Or (40X40mm), 25 Mm); Secondary And Internal Tubes 40 X 40 Mm, 25 Mm) As Per Project. The Covers Closing Plate Must Be Made Of Plate No. 16. Its Connections Must Be Screwed, Ensuring Resistant Fixation And Protection From Wind Action. Closing: The Closure, Both Side And Rear, Will Be Made Of Smooth Steel Plate No. 16, Properly Screwed To The Stop Structure. It Must Be Painted With Epoxy Paint (Electrostatic) In Order To Avoid Corrosion. The Rear Panel Must Contain A Sticker Showing The Coat Of Arms Of The Municipality Of Nerópolis And A Wheelchair Sticker In Accordance With Nbr 9050. The Main Structure Of The Rear Panel Will Be Made Of 50X50 Mm Tubes, On Plate 13 (2.25 Mm). The Secondary Structure Of The Side And Bottom Panels Will Be Made Of 40 X 40 Mm Tubes, Sheet Thickness 13 (2.25 Mm). All Tubes Must Be Welded Together Using Solder, 08/21/2024