Request For Quotation Goods Of Management

Mini Polyacrylic Roller Not Less Than 60 Mm, Signal Barrier Tape, Red And White, Not Less Than 50Mm*200Mm, The Glue Is Intended For Gluing Any Rubber Materials (Especially Effective For Gluing Rubbers Based On Natural, Styrene And Isoprene Rubbers), Thermoplastics, Leather, Leather Substitutes, Chamois, Leather, Fabric, Foam And Other Porous And Fibrous Materials, Cellulosic Materials (Paper, Cardboard And Etc.), Metals, Glass, Plastics (Except Plasticized), Wood, Ceramics, Etc. When Gluing Polymeric Materials Containing More Than 10 Parts By Mass Of Plasticizer, The Glue Can Be Used As An Assembly Glue. Adhering Of Polyethylene, Polyethylene Foam, And Polypropylene Is Allowed. Effective For Gluing Epdm Membranes. It Is Used In The Manufacture Of Furniture, Manufacture And Repair Of Shoes, In Construction, In Industry And In Everyday Life. The Adhesive Seam Has High Elasticity And Water Resistance. 88-Luxe Glue Is Approved For Use By The Center For State Sanitary And Epidemiological Supervision Of Moscow. Appearance Viscous Liquid From Yellow To Light Brown Color. 2 Conditional Viscosity According To Vz-246 (Nozzle 4 Mm), P 90-180 3 Content Of Non-Volatile Substances, Wt.% 33-43 4 Strength Of The Adhesive Joint When Peeling, Kg/Cm: Rubber 56/Rubber 56 2.0 Kirza/Kirza 2.0 State Of The Glue Finished Emulsion The Strength Of The Adhesive Joint Is 2 Mpa The Main Ones Type Of Use Universal Shelf Life 60 Months State Of Glue Ready Emulsion The Strength Of The Adhesive Joint Is 2 Mpa Number Of Components One-Component The Time For Complete Solidification Of The Solution Is 24 Hours User Characteristics The Maximum Operating Temperature Is 40 Degrees. The Minimum Working Temperature Of The Environment Is 0 Degrees. The Minimum Storage Temperature Is 5 Degrees. In 1 Jar At Least 0.9 L, Enamel Pf Not Less Than 115, Characteristics Not Less: Intended For Painting Wooden, Metal And Other Surfaces Exposed To Atmospheric Influences, For Painting Indoors, As Well As Over Old Coatings With Enamels And Oil Paints. Mix The Enamel Thoroughly Before Use. When Thickening, The Enamel Must Be Diluted With White Spirit, Solvent Or Their Mixture In Accordance With 1:1, No More Than 5% Of The Mass Of The Enamel. Enamel Is Applied With A Roller Or A Brush On A Dry, Previously Cleaned Surface From Dust And Other Contamination. The Drying Time Of Each Layer (20±2) Is 24 Hours. Enamel Consumption For A Single-Layer Coating, Depending On The Color, Surface Condition And Application Method - 100-180G/M². Enamel Is Stored In A Tightly Closed Container, Protecting It From Moisture And Direct Sunlight. Color - Series. Weight - 1.8 Kg. St Rk 3262-2018 Gost 6465-76, The Skin Is Made Of Abrasive Material (Aluminum Oxide) On A Fabric Basis. It Is Used In Grinding And Finishing Works. Water Resistant Grain Not Less Than 4H Not Less Than 800 Mm, Tile Glue Weight Kg Not Less Than 25 Purpose Of Use For Facing Walls And Floors Ceramic Field Of Application For External And Internal Works, In Dry Conditions The Basis For Application Concrete, Brick, Plastered With Cement Consumption Kg/Sq M When Applied With A Toothed Spatula Binding Cement Application Temperature °С From +5ºс To +30ºс The Thickness Of The Protective Layer Mm Not Less Than 2-5 Color Series Gost R 56387-2018, Pipe Not Less Than 40*3.0 Mm Not Less Than L = 12.00, Ceramic Granite Tile Length (Cm) No Less 60 Width (Cm) Not Less 60 Color Light Gray, Mesh Filter Not Less Than 1 G/G Brass With Internal Thread Is Used In Pipelines Of Drinking, Household And Industrial Systems, In Pipelines Of Cold, Hot Water Supply, Heating, Compressed Air, Liquid Hydrocarbons Systems, In Technological Pipelines Transporting Media, Not Aggressive To The Filter Materials The Accuracy Of Flowmeters (Water Meters) Increases. The Filter Is Equipped With A Removable Plug, Which Makes It Possible To Easily Remove Filtered Particles From The Device. The Filter Element Is Made Of Stainless Steel Less Than 500 Μm., Sgon With A Diameter Of Not Less Than 25, To Ensure Water Circulation In Heating Systems, As Well As Floor Heating Systems In Buildings Of Any Purpose. Installation Of The Pump Is Simple And Convenient, It Is Installed Directly On The Pipeline. The Circulation Pump For The Heating System Is Equipped With A Speed Switch (3 Operating Modes), Which Allows You To Choose The Optimal Operating Mode And Save Electricity. The Circulation Heating Pump Has Small Overall Dimensions And Weight, Works Almost Silently, Thanks To A Specially Designed Wet Rotor. The Water Pump For Heating Is Easy To Use And Maintain. Cooling And Lubrication Of Ceramic Bearings Is Carried Out By Pumped Liquid. The Heating Circulation Pump Is Designed To Work With Liquid, The Temperature Of Which Can Reach 110 °C. The Impeller, Made Of Heat-Resistant Composite Material, Guarantees The Anti-Corrosion Resistance Of The Unit. Electric Circulation Pump For Heating Has A Long Service Life. Characteristics Not Less Than: Circulation Pump C 25/6 -130 General Characteristics Type Surface Circulation Maximum Pressure 6 M Bandwidth 2.4 Cubic Meters M/Hour Network Voltage 220/230 V Power Consumption 90 W Included Cap Nuts, Gaskets Water Water Quality Clean Permissible Liquid Temperature From -10°C To 110°C Construction Body Material Cast Iron Installation Length 130 Mm Pump Mechanism Centrifugal Thread Diameter Of The Exit Hole (G) 1½″ Pump Installation Horizontal/Vertical Detailed Equipment Pump - 1 Pc.; Rubber Gaskets - 2 Pcs.; Technical Passport - 1 Pc.; Sgon With Cap Nut - 2 Pcs.; Packaging - 1 Pc Dimensions (Wxhxd) 12.8X13x12.9 Cm Weight 2.2 Kg Additional Information Maximum Working Pressure 10 Bar, Motor Material - Copper, Motor Body Material - Aluminum, Bearing Material - Ceramic, Shaft Material - Ceramic