Request For Quotation Purchase Of Household Goods

Gas Nozzle Holder For Semi-Automatic. The Total Length Is 42.0 Mm, The Connection Thread Of The Tip Is M6, The Connection Thread To The Nozzle (Goose) Of The Burner Is M8, The Holder Material Is High-Quality Brass, Conductive Tips For P/A Burners Ø 0.8; 1.0 Mm Are Intended For Replacing Fast-Wearing Contact Tips In Semi-Automatic And Automatic Welding Torches (Holders). Made Of Dispersion-Hardened Copper Nt 01.06.25, They Can Be Coated Or Not (Nickel-Plated, Silver). The Coating Of The Tips Provides Them With Increased Resistance., Metal Cut-Off Disk, Cut-Off Disk, Diameter 300*3.0*32, Wire For Welding (Surfacing) 0.8 Mm Brand Sv-08G2s Has High Welding And Technological Properties According To Gost 2246-70, Increases The Strength Of The Weld Seam, Reduces Spatter, Refueling The Cylinder. Carbon Dioxide For Welding, The Volume Of One Cylinder Is 40 Liters Working Pressure: 14.7 Mpa (150 Kgf/Cm²), The Hammer Is Made Of Durable High-Quality Steel. The Handle Is Made In The Form Of A Spring Spiral, Which Softens The Recoil When Hitting The Metal, And Thereby Relieves The Burden On The Hand., Electrodes Uona 13-55 Diameter 3 Mm. The Surfacing Coefficient Is 10.5-11.5 G/Ah.H. The Consumption Of Electrodes Per 1 Kg Of Deposited Metal Is 1.58 Kg. The Nominal Productivity Is Up To 115%. Electrodes With A Diameter Of 2.0 Mm To 4.0 Mm Are Intended For Welding In All Spatial Positions Except For The Vertical Top-Down, And With A Diameter Of 3.0 Mm - For The Lower, Horizontal On A Vertical Area And The Vertical Method Bottom-Up., Length — 76.0 Mm Nozzle According To The Type Of Connection - Plug-In (Clamp) Seat Diameter — 24.0 Mm The Nozzle Outlet Diameter Is 16.0 Mm Material — Copper Alloy With Electropolishing. When Installing, Replacing And Cleaning The Nozzle, It Is Necessary To Exclude Pliers, Files And Other Similar Tools, The Use Of Which Leads To A Violation Of The Quality Of The Surface Of The Nozzle, An Increase In The Probability Of Sticking Of Splashes And A Decrease In The Duration Of Operation., The Mr-3 Electrode Is A Carbon Steel Electrode With A Lime-Titanium Coating. Suitable For Both Alternating Current And Direct Current. Welding Can Be Done In Any Position, Diameter 3.2 Mm, Technical Oxygen In Cylinders (40 L) With A Pressure Of 135-150 Atmospheres, Refueling, Corner 16, Connection 16*1/2 S Nar R Hb, Tee 16*16*16, Cut-Off Disk For Metal 150X1.6*22.23 Cut-Off Disk, Hot-Rolled Sheet, Thickness 4.0 Mm, Size 1.50 X 6.00, Steel St3sp-5 289.00 455,000 131,495.00, The Additive Is Intended For Welding Stainless Steel In An Argon Gas Medium With A Non-Melting Electrode. The Diameter Is 3.2 Mm, Classification According To The Length Of The Measured Length Of Aluminum Er-5356 Material Of The Circle (Bar) Aluminum Coating Without Coating Durability High Condition Of The Product New Condition Of The Material Without Heat Treatment Manufacturing Method Cold-Rolled Manufacturing Accuracy High Diameter 3 Mm., Welding Of Specially Responsible Constructions From Carbon, Low-Alloy And Stainless Steels, Copper, Titanium And Their Alloys On Direct Current. Ittriated Tungsten Is The Most Resistant Of The Non-Melting Electrodes Used Today. Diameter 2.4 Mm., Cutting Disc For Metal Cutting Disc Diameter 180*1.6*22.23,, Kg 1X35 Is A Power Flexible Cable - 1 By 35 Mm2, With A Copper Core, Insulation And A Rubber Sheath.