Tenders Are Invited For Construction Of A Multi-Purpose Sports Field With A Roof At The Primary School In Bojan

1) The Main Entrance To The Facility Is Located In The Connector. Entrance Profiled Without Barriers For Disabled People And People In Wheelchairs. A Single-Story Connector Serving As A Corridor Between The Existing School Building And The Sports Hall. The Connector Leads To A Two-Story Cloakroom And Sanitary Facility. In The Locker Room And Sanitary Facilities, In Addition To The Locker Room And Sanitary Systems, There Is Also A Trainers Room With A Bathroom, A Utility Room, An Equipment Warehouse, A Technical Room, And A Toilet For Disabled People. On The First Floor There Are Technical Rooms, A Public Toilet And An Audience For About 40 Seats. The Locker Room And Sanitary Facilities Are Located In One Building With The Sports Hall.2) There Are A Total Of Three Exits Directly Outside The Building, Constituting Emergency Exits. The Main Single-Story Hall Building With Two-Story Social And Cloakroom Facilities3) Sports Surface Area Of ​​632.47 M2 And Playing Field Height Of 8.545 M, The Following Courts Were Designed: A) Main Basketball Court B) 2 Basketball Training Courts, (Baskets Only On The Wall) C) Sports Field Main Handball Court (Not Sized Court)D) Main Volleyball Court4) There Are Two Emergency Exits From The Sports Hall On The Ground Floor, One Directly Outside. Illumination Of The Room Through Fanlights In The Longitudinal And Gable Walls. The Newly Designed Facility Covers All The Functional And Utility Parameters For The Designed Sports Hall And Additional Parameters For The Existing School.3. The Contractor Is Obliged To Perform Post-Construction Geodetic Measurement Of The Task; Documentation Stamped With Appropriate Stamps Confirming Positive Control By The District Office Should Be Submitted In Writing - 3 Copies And Electronically In (Pdf Or Jpg And A File Opened By The Cartographic Program Mmp Or Dxf). 4. The Ordering Party Presenting Proper Names In The Documentation Describing The Subject The Purpose Of The Order Was Only To Clearly Show What Technical Parameters The Material (Device) Should Be Used To Perform Construction Works. The Use Of Proper Names Does Not In Any Way Suggest The Manufacturer, It Is Only An Example. The Contractor Is Obliged To Use The Products Of The Manufacturer Selected By Him With The Same (Equivalent) Technical And Quality Parameters. Compliance Of The Parameters Should Be Confirmed By A Certificate Issued By A Conformity Assessment Body (Or Other Equivalent Conformity Assessment Bodies) Or By A Test Report Carried Out By This Body As Evidence Confirming Compliance With The Requirements Or Characteristics Specified In The Description. Subject Of The Order, Offer Evaluation Criteria Or Terms Of Order Execution. The Ordering Party Also Allows Other Appropriate Means Of Evidence (In Particular The Manufacturers Technical Documentation) Confirming The Compliance Of The Materials (Devices) Proposed By The Contractor If The Contractor Does Not Have Access To Certificates Or Test Reports Or Is Unable To Ob