Tenders Are Invited For Adding Lighting In The Housing Estate At Ul. L. Ruczki

The Subject Of The Order Is The Implementation Of The Task: Addition Of Lighting In The Housing Estate At Ul. L. Ruczki”The Extension Covered By The Application Includes 3 Circuits Made Of Yakxs 4X35 Mm2 Earth Cable Laid Along Its Entire Length In A Dvd 75 Protective Pipe Along With A Thermal Insulation Tape. 30X4 Mm.: Circuit No. 3 With Poles And Fixtures No. O9 And O10, Circuit No. 5 With A Pole And Fixture O15 And Circuit No. 6 With Poles And Fixtures O16 And O17, In Accordance With The Detailed Design. Round Galvanized Steel Poles, Placed On Foundations, Powder Coated In Ral 9011, 4 M High. Park Type Led Luminaires, With Closed Cover, Luminous Flux Min. 7500 Lm, Powder Coated In The Color Of The Pole With Nema 5/7 Pin Sockets With Lighting Controllers, Compatible With The Control System Used In The Kolbuszowa Commune. At The End Of Each Circuit, Additional Pin Grounding Should Be Made Connected To The Hoop Iron So That The Measured Impedance Of The Earth Electrode Is Less Than 10 Ω. The Lighting Control Must Be Compatible With The Existing System Used In The Kolbuszowa Commune. The Existing System Is Maintained By Enis Ul. Krakowska 140A, 34-120 Andrychów. Park-Type Led Lighting Fixtures And Poles Should Have An Appearance And Shape Similar To Those Already Installed, But Have A Closed Housing; The Current Task Is A Continuation Of The Previously Started Lighting Installation. Minimum Requirements For Led Lighting Fixtures: 1) Housing Made Of Die-Cast Aluminum, Cover Made Of Polycarbonate2) The Body Is Powder-Coated In Ral 9011, With An Electrostatic Coating,3) The Luminaire Is Made In Class Ii Anti-Shock Protection6) The Luminaire And Accessories Chamber Is Ip 66 Tight, Must Include A Pressure Equalizing Filter, 7) Impact Resistance - Ik 088) Color Temperature Of The Diodes Used In The Range Of 3800K - 4200K 9) Luminaire Power Supply System Enabling Control Of An Analog Signal 0 -10 V 10) Power (Flux) Reduction Must Be Carried Out Smoothly By Reducing The Luminous Flux Of All Led Sources Simultaneously And Not By Turning Off Individual Led Panels In One Luminaire 11 ) Luminous Efficiency Of The Luminaire (Taking Into Account All Losses) Min. 150 Lm/W12) Power Factor (Cos Φ)≥0.98 For The Rated Power, Maintaining The Power Factor Cos Φ Above 0.96 When Controlling The Luminaire In The Range Of 20-100% Of The Rated Power13) Resistance Of The Luminaire To Overvoltages: 10 Kv.14) The Luminaires Hook Should Be An Integral Part Of The Luminaire And Be Able To Be Mounted Directly On Lighting Poles Without An Additional Adapter. 15) The Luminaire Is Equipped With A Nema 5/7Pin Socket, 16) It Has Valid Certificates: Ce, Rohs, Enec17) The Luminaire Is Painted In The Color Of The Poles18) Warranty Min. 5 Years (60 Months) From The Date Of Acceptance Of The Works. Note: If The Swz Or Annexes To The Swz, Including Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, Would Indicate Trademarks, Origins, Technical Approv