Request For Quotation Household Goods, Building Materials

The Skin Is Made Of Abrasive Material (Aluminum Oxide) On A Fabric Basis. It Is Used In Grinding And Finishing Works. Water Resistant Grain Not Less Than 4H Not Less Than 800 Mm, Mini Polyacrylic Roller Not Less Than 60 Mm, The Glue Is Intended For Gluing Any Rubber Materials (Especially Effective For Gluing Rubbers Based On Natural, Styrene And Isoprene Rubbers), Thermoplastics, Leather, Leather Substitutes, Chamois, Leather, Fabric, Foam And Other Porous And Fibrous Materials, Cellulosic Materials (Paper, Cardboard And Etc.), Metals, Glass, Plastics (Except Plasticized), Wood, Ceramics, Etc. When Gluing Polymeric Materials Containing More Than 10 Parts By Mass Of Plasticizer, The Glue Can Be Used As An Assembly Glue. Adhering Of Polyethylene, Polyethylene Foam, And Polypropylene Is Allowed. Effective For Gluing Epdm Membranes. It Is Used In The Manufacture Of Furniture, Manufacture And Repair Of Shoes, In Construction, In Industry And In Everyday Life. The Adhesive Seam Has High Elasticity And Water Resistance. 88-Luxe Glue Is Approved For Use By The Center For State Sanitary And Epidemiological Supervision Of Moscow. Appearance Viscous Liquid From Yellow To Light Brown Color. 2 Conditional Viscosity According To Vz-246 (Nozzle 4 Mm), P 90-180 3 Content Of Non-Volatile Substances, Wt.% 33-43 4 Strength Of The Adhesive Joint When Peeling, Kg/Cm: Rubber 56/Rubber 56 2.0 Kirza/Kirza 2.0 State Of The Glue Finished Emulsion The Strength Of The Adhesive Joint Is 2 Mpa The Main Ones Type Of Use Universal Shelf Life 60 Months State Of Glue Ready Emulsion The Strength Of The Adhesive Joint Is 2 Mpa Number Of Components One-Component The Time For Complete Solidification Of The Solution Is 24 Hours User Characteristics The Maximum Operating Temperature Is 40 Degrees. The Minimum Working Temperature Of The Environment Is 0 Degrees. The Minimum Storage Temperature Is 5 Degrees. In 1 Jar At Least 0.9 L, Enamel Pf Not Less Than 115, Characteristics Not Less: Intended For Painting Wooden, Metal And Other Surfaces Exposed To Atmospheric Influences, For Painting Indoors, As Well As Over Old Coatings With Enamels And Oil Paints. Mix The Enamel Thoroughly Before Use. When Thickening, The Enamel Must Be Diluted With White Spirit, Solvent Or Their Mixture In Accordance With 1:1, No More Than 5% Of The Mass Of The Enamel. Enamel Is Applied With A Roller Or A Brush On A Dry, Previously Cleaned Surface From Dust And Other Contamination. The Drying Time Of Each Layer (20±2) Is 24 Hours. Enamel Consumption For A Single-Layer Coating, Depending On The Color, Surface Condition And Application Method - 100-180G/M². Enamel Is Stored In A Tightly Closed Container, Protecting It From Moisture And Direct Sunlight. Color - Series. Weight - 1.8 Kg. St Rk 3262-2018 Gost 6465-76