Request For Quotation Purchase Of Dental Materials

Acrylic Teeth In A Package Of 4 Boxes Contains 20 Complete Sets (560 Teeth) Colors A1, A2, A3, A3.5, A4, B2, B3, C2. Resistant To Breakage, Excellent Adhesion To The Base Of The Prosthesis, Fluorescent, In Convenient Packaging, Easy To Use. Agree With The Customer, Diamond Disk Flat Reinforced 327 514 220 Two-Sided Fine-Grained D=20.22 Mm, Agree With The Customer, Packaging Liquid To Packaging Mass. The Use Of This Liquid Allows You To Precisely Control The Expansion (Expansion). Bresol R Creates Ideal Prerequisites For Performing Dental Work From Alloy. Agree With The Customer, Polishing Abrasive Dental Paste, 75G Of Paste In A Tube. Light Abrasive Paste Is Intended For Professional Cleaning Of Teeth In The Dental Office. It Is Used For The Final Cleaning And Polishing Of The Surface Of The Teeth For Preventive And Therapeutic Removal Of Tartar, For The Removal Of Dental Plaque And Pigmentation For Conservation Care Of Teeth Or Medical Or Controlled Whitening Of Teeth. Agree With The Customer, Disposable Dental Napkin (33X45 Cm.) Disposable Napkins Intended For Maximum Protection Of The Patients Clothing From Contamination During Dental Procedures And Medical Manipulations. Napkins For The Patient Are Made Of A Double Layer Of Cellulose Paper And One Layer Of Durable Polyethylene Film, The Density Of The Paper Layer Is 17 G/M2, The Density Of The Film Is 13 G/M2. It Has Good Absorbency And Provides An Excellent Moisture Barrier., Pumice Powder. White Powder Based On Electrocorundum With A High Content Of Aluminum Oxide (99.5%) Does Not Cause Silicosis (Because It Does Not Contain Silicon Oxide). Abrasive Particles Of The Powder Are Inferior In Hardness Only To Diamond, Provide Excellent Surface Treatment, During Which They Are Crushed And Thus Retain A Sharp Edge During The Entire Processing. Grit No. 10 — 125-106 Μm — For Removal Of Packing Mass And Oxide Film From Alloys With A Low Content Of Precious Metals, Processing Frames And Creating Mechanical Retention Surfaces Before Firing., It Is Intended For The Production Of Stamps, Models Used In The Production Of Crowns, Clasps And Braced Prostheses. The Low-Melting Alloy Contains Bismuth, Tin, Lead And Other Metals. The Alloy Melts At A Temperature Of 96°C, Is Quite Hard, But Easily Processed, Has Good Casting Properties And Minimal Shrinkage Upon Cooling. Agree With The Customer