Tenders Are Invited For Purchase Of An Anesthesia Machine With Additional Equipment On A Mobile Base As The Implementation Of The Purchase Of Equipment And Apparatus Task In 2024 Under The National Transplantation Program

Description Of The Subject Of The Order Anesthesia Machine With Additional Equipment On A Mobile Base (The Order Includes The Delivery Of A Total Of 1 Device With A Mobile Base And Additional Equipment) - Required Parameters: A. General Parameters1) Machine On A Mobile Base, Central Brake.2) Factory Mounts Two 10-Liter Reserve Cylinders, Non-Built-In Regulators For O2 And N2o Cylinders3) Device Adapted To Work At Central Network Pressure For: O2, N2o, Air From 2.7 Kpa X 100.4) Heated Breathing System, Heating Can Be Turned Off/On By The User In The Configuration System.5) Emergency Power Supply For The Entire System From The Built-In Battery For Up To 120 Minutes.6) Worktop. Built-In, Adjustable Countertop Lighting.7) Drawer For Accessories With A Permanent Lock (Key Lock, Mechanical Lock), The Height Of The Drawer Allows For Vertical Positioning Of The Inhalation Anesthetic Bottle.8) Presentation Of Gas Pressures In The Central Network And In Reserve Cylinders On The Main Screen Ventilator.9) Safety System Ensuring At Least 25% Share Of O2 In The Mixture With N2o.10) Electronic Mixer: Ensuring Maintaining The Set Inspiratory Oxygen Concentration When Changing The Fresh Gas Flow Rate And Maintaining The Set Fresh Gas Flow When Changing The Oxygen Concentration In The Mixture Administered To The Patient .11) Apparatus With Inspiratory And Expiratory Flow Sensors. Thermoanemometric Sensors (So-Called Heated). Sensors Can Be Steam Sterilized.12) Virtual Flow Meters Presented On The Device Screen.13) Device Adapted To Perform Low Flow And Minimal Flow Anesthesia.14) Adjustable Pressure Limiting Valve In Manual Ventilation Mode (Apl) With The Function Of Immediate Release Of Pressure In The System Without The Need To Twist To A Minimum.15) Built-In O2 Flowmeter For Independent Oxygen Supply Through A Mask Or Nasal Cannula, Flow Regulation From At Least 0 To 18 L/Min.16) Active Place To Attach Min. One Evaporator; Auto Exclusion Or Interlock Mounting.17) Delivery Includes Min. 18 Disposable Tanks With Soda Lime, Volume Of Disposable Absorber At Least 1200 Ml; With Smaller Capacity, You Should Offer Min. 21.6 Liters Of Lime In The Appropriate Number Of Disposable Containers.B. Ventilator Ventilation Modes1) Economical Ventilator With Electric Drive.2) Volume-Controlled Ventilation.3) Pressure-Controlled Ventilation.4) Synchronized Ventilation With Pressure Support Of Spontaneous Breaths In Volume-Controlled Mode And Pressure-Controlled Mode (Vcv-Simv/Ps, Pcv-Simv/ Ps).5) Cpap/Psv6) Pause Function (Stopping Controlled Ventilation, E.G. For The Duration Of Mucus Suction Or Changing The Patients Position), Presentation On The Ventilator Screen Of The Time Remaining Until The End Of The Pause, Pause Duration Adjustable To At Least 30 Min.7 ) Automatic Switchover To Replacement Gas: - After O2 Disappearance To 100% Air, - After N2o Disappearance To 100% O2, - After Air Disappearance To 100% O2. In All Cases, The Current Flow Of Fresh Gases Remains Constant (