Tenders Are Invited For Delivery And Installation Of A New Elevator At The J. A. Comenius Economic School Complex In Leszno

1. The Subject Of The Order Is: Delivery And Installation Of A New Elevator In The Economic School Complex. J. A. Komeńskiego In Leszno, In Accordance With The Scope And Provisions Resulting From This Swz Together With Its Annexes. 2. The Subject Of This Order Is The Delivery And Replacement Of An Old Elevator With A New One, Adapted For Disabled People. The Task Involves Dismantling The Existing Passenger Lift Together With The Elevator Equipment And Installing A New Lift In The Existing Elevator Shaft Along With Commissioning. The Scope Of The Order Includes In Particular: 1) General Construction/Installation Works Of The Elevator: A) Securing The Work Area At An Active Educational Facility Against Access By Unauthorized Persons; B) Dismantling The Existing Passenger Lift With Accessories, Dismantling All Guides And Fenders In The Shaft. At The Shaft Head Level, The Gear System And The Elevator Drive System Are Scheduled For Disassembly. Elevator Shaft Doors And Wall Jambs Are Scheduled For Disassembly On Each Landing Floor; C) Disposal Of Dismantled Elements; D) Cleaning The Elevator Shaft From Dust, Dust And Residues Of Petroleum Substances; E) Filling Any Holes/Gaps Created After Dismantling With Renovation Mortars; F) Repainting The Elevator Shaft; G) Clean And Renovate (Paint) The Communication Ladder To The Shaft; H) Due To The Work Carried Out In An Active Facility, It Is Required For The Time Of Replacement, Covering The Doors At All Stops With A Rigid And Tight Casing, E.G. With A Thick Osb Board. 22Mm, Attached To The Walls With Expansion Bolts;I) On Each Floor, After Installing New Elevator Doors, Wall Jambs And Control Panels, The Door Recess Portals Should Be Renovated (Putty And Painting Plasters);J) Delivery And Installation Of A Device With The Parameters Specified In Description Of The Subject Of The Order; 2) Works On Sanitary Installations: A) Installation Of Steel Spiro Ventilation Pipes, Lead The Cables Above The Roof Surface And Install Ventilators Installed Within The Roof Slope Covered With Ceramic Roof Tiles. 3) Electrical Installation Works: A) Dismantling And Disposal Of Existing Lighting Fixtures Along With The Lighting Cable In The Shaft And Above The Shaft (Machine Room); B) Dismantling The Power Supply, Control And Operation Mechanisms Of The Elevator (A Control Cabinet With A Power Line Is Planned For Disassembly); C ) Laying A New Lighting Line In A Smooth, Rigid Tube Mounted On The Surface To The Concrete Surface Using Brackets; D) Leading Two Circuits From The Existing Switchboard, One To Power The Engine Room Lighting, The Other To Illuminate The Shaft. Basic Parameters Of The New Device: - Year Of Production Of The Elevator: Not Older Than 2023; - Electric Drive; - Transport Of People, Including Disabled People; - Door System - Non-Passing; - Number Of Stops: 5 (-1, 0, 1, 2, 3 ); Minimum Load Capacity 1000 Kg (Minimum 13 People); Cabin With Dimensions Of Minimum 140X160 Cm, Cabin Height Minimum 220 Cm; De