Tenders Are Invited For Task No. 1: Construction Of Street Lighting In Zarębki - Part And Task No. 2: Construction Of Street Lighting In Kolbuszowa Górna - Wojków - Part And

The Subject Of The Order Is The Implementation Of Two Tasks: Task No. 1: Construction Of Street Lighting In Zarębki - Part Itask No. 2: Construction Of Street Lighting In Kolbuszowa Górna - Wojków - Part Itask No. 1: The Construction Of Lighting Covered By The Application Includes A Section Of The Network Powered By The Existing S1-0 Steel Lighting Pole, Made Of Yakxs 4X35 Mm2 Earth Cable, Laid Throughout In A Dvd 75 Protective Pipe, Together With An Insulating Tape. 30X4 Mm., 62 M Long, And An Overhead Network 197 M Long, Made Of Asxsn 2X25 Mm2 Cable, Suspended On 5 Spun Poles, 12 M High, Placed Directly In The Ground With Footing Plates - According To The Documentation, These Are S1-1 Poles For S1-5. Pole S1-1 E-12/10, S1-2 To S1-4 E12/4,3, S1-5 E12/6. Lightning Arresters Should Be Installed On The S1-1 And S1-5 Poles And Their Grounding Must Be ≤ 10 Ω. Led Luminaires With A Luminous Flux Of Min. 7140 Lm, Mounted On Tubular Booms Placed On Spun Poles. At Intersections Or Close Proximity To The Existing Overhead Power Or Telecommunications Network, The Lighting Cable Should Be Routed To Maintain The Required Minimum Distance. Crossing Profiles Should Be Included In The As-Built Documentation. Two-Chamber Led Road Luminaires With Factory-Installed Nema 5/7 Pin Sockets Along With Lighting Controllers. The Lighting Control Must Be Compatible With The Existing System Used In The Kolbuszowa Commune. The Existing System Is Maintained By Enis Ul. Krakowska 140A, 34-120 Andrychów. Task No. 2: Construction Of An Overhead Street Lighting Network, Powered By The Existing Pole 21/2/9 (In S0 Documentation), 261 M Long, With Asxsn 2X25 Mm2 Cable, Suspended On 5 Spun Poles, 12 M High, Placed Directly In The Ground With Footing Slabs, 261 M Long - According To The Documentation, Columns S1 To S5. Pole S1 And S2 - E-12/4.3, Pole S3 - E-12/6, Poles S4 And S 5 - E-12/10. A Lightning Arrester Should Be Installed On The S5 Pole And Grounding ≤ 10 Ω Should Be Performed. Led Luminaires With A Luminous Flux Of Min. 7140 Lm, Mounted On Tubular Booms Mounted On Spun Poles. In Case Of Discrepancies Between The Technical Documentation And The Order Description, The Documentation Should Be Agreed Between Pge Dystrybucja S.A., Stwiorb And The Bill Of Quantities. Minimum Requirements For Led Luminaires, Applies To Tasks No. 1 And No. 2: 1) Two-Chamber Casing Made Of Die-Cast Aluminum, Tempered Glass With A Self-Cleaning, Scratch-Resistant Coating2) Powder-Coated Body With Electrostatic Coating,3) Luminaire Made Of Class Ii Anti-Shock Protection6) Housing And Accessories Compartment With Ip 66 Tightness, Must Include A Filter Equalizing Pressure, 7) Impact Resistance - Ik 088) Color Temperature Of The Diodes Used In The Range Of 3800K - 4200K 9) Luminaire Power Supply System Enabling Control Of An Analog Signal 0 - 10 V 10) Power (Flux) Reduction Must Be Carried Out Smoothly By Reducing The Flux Light Of All Led Sources At The Same Time And Not By Turning Off Individual Led Pa