Tenders Are Invited For Asphalt Overlays In The City And Commune Of Środa Wielkopolska

Task No. 1: Asphalt Overlays In Ul. Lotnicza In Środa Wielkopolska The Subject Of The Order Is The Reconstruction Of Ul. Lotnicza (Dg 560055P) In Środa Wielkopolska On The Section From Ul. Dywizjonu 303 To The Ruszkowo 1C Property. The Section Of The Road From Ul. Is Being Rebuilt. Dywizjonu 303 To The Ruszkowo 1C Property In The Distance From 0+000 To 0+796.75. The Investment Is Located In Środa County, Greater Poland Voivodeship, On Plots With Registration Number: 402; 3689/105 Within 0004 Środa Wielkopolska, 89 Within 0015 Mączniki And Plot No. 56 Within 0027 Tadeuszewo. It Is Envisaged That The Surface Structure Will Be Constructed Along The Existing 5.00 M Wide Road Trace And At The Connection Of The Road In Question With Cross Roads, The Construction Of 2 Speed Bumps Made Of Concrete Cubes With An Approach Speed Of 25-30 Km/H. Elements Of Technical Infrastructure Fittings Within The Scope Of The Construction Works Should Be Adjust Their Height And Replace Them With New Ones If Damaged. (If Required). The Following Scope Of Construction Works Is Planned As Part Of The Implementation Of The Planned Investment: • Securing The Continuity Of Road And Pedestrian Traffic For The Duration Of The Works, Including Possible Detours, • Preparatory Works, • Height Adjustment Of The Existing Underground Infrastructure Fittings - If Required • Construction Of Lower Layers Of The Pavement Structure At The Entrances Of Intersections • Cleaning And Sprinkling The Binding Layer With Asphalt Emulsion Before Laying The Wearing Course • Construction Of Speed Bumps Made Of Concrete Cubes • At The Junction Of The Resistor And Bituminous Mass, Fill The Gaps With Grouting Mass • Finishing And Cleaning Works • Preparing An As-Built Inventory. Designed Road Surface Structure: - Wearing Course Made Of Ac11s Mineral-Asphalt Mixture. 4 Cm; - Anti-Cracking Layer Made Of Reinforcing Mesh - Basic Foundation Made Of Crushed Aggregate C90/3 Gr. 15 Cm; - Auxiliary Base Made Of A Cement Mixture C3/4 Rm = 5Mpa Thick. 15 Cm; Designed Construction Of The Speed Bump: - Wearing Course Made Of Red Concrete Cubes, Behaton Type, 10X20 Cm Thick, With A Bevel, Thickness. 8 Cm;- Cement-Sand Bedding 1:4 Gr. 5 Cm;- Substructure Made Of Mechanically Stabilized Crushed Aggregate, Thickness. 15Cm; - Auxiliary Subbase Made Of A Mixture Bound With Cement C1.5/2 = 2.5Mpa 15Cm;