Tenders Are Invited For Electrical Wiring And Fitting Work – Electrical Engineering - Network Expansion Tower Rooms

Electrical Wiring And Fitting Work – Electrical Engineering - Network Expansion Tower Rooms. The Aachen University Hospital Is Planning To Rebuild The Ups Network And Expand The Replacement Network Distributions In The A, B, C And D Series Towers For The Sdlc Ring. The Following Measures Are Required: ? Reconstruction Of The Ups Subdistributions In Towers A1, A2, A3, A4, A5, A6, B6 And C1 As Well As D1, D2, D3, D4, D5 And D6. ? Reconstruction Of The Replacement Network (En) Sub-Distributions In Towers A3, A4, A5, A6, B6, D3, D4, D5 And D6. ? New Area Main Distribution (Bhv) Ups Network Technology On Tower C2 On Floor 10 (Outdoor Area). ? New Area Main Distribution (Bhv) Ups Network Technology On Tower C6 On Floor 10 (Outdoor Area). ? Conversion Or Retrofitting Of The Main Area Distribution (Bhv) Ups Network Technology On Tower C4 On Floor 10 (Outdoor Area). Here, For Example, B. Switch Disconnector D02 Can Be Added. ? New Main Distribution (Hv) Ups Network Technology On Tower C4 On Floor 10 (Outdoor Area). Dismantling The Old Main Distribution (Hv10) On Floor 10 (Outdoor Area). ? Construction Of New Cable Routes Including Necessary Uv Protection Measures. ? Laying In Existing Cable Routes Or Cable Bridges And Connecting The Supply Lines For The Sub-Distribution En, Ups And Bhv And Hv. This May Require Further Coordination With The Gb-Gt Eip Electrical Engineering At The Rwth Aachen University Hospital. ? Expansion Of The Existing Potential Equalization. Info: The Freight Elevator In Tower A1 Is The Only One That Goes Up To Floor 10 And Can Be Used For Upcoming Transports (Max. 900 Kg). Further Transport Routes Must Be Clarified In Detail With The Construction Management During The Construction Phase