Bids Are Invited For Acquisition Of School Furniture To Supply The Demand Of The Perimbó Educational Center, Cantinho De Luz Childrens Education Center And Cantinho Do Saber Early Childhood Education Center - Municipal Creches

Dining Room Set (One Table And Two Benches): Table: Structure In Rectangular Steel Tube 20X40 (Wall 1.50 Mm), Monoblock Type (Single Structure) With Angle-Shaped Cuts Allow The Table To Fit In, Making It Stackable. Welding Of Metallic Parts Using The Mig Process Throughout The Perimeter Of The Union, Joints With A Smooth And Homogeneous Surface, Without Presenting Sharp Points, Roughness Or Slag. Surface Protection With Special, Anti-Corrosion Treatment And Epoxy-Powder Painting. Top (2000X650mm) In 18 Mm Thick Mdf Covered In Melamine Laminate Finished On The Edges With Pvc Type (T), Fixed To The Structure Using 6 Steel Plates Measuring 32X21x2 Mm And Self-Tapping Screws. Closing The Tops With Plastic Tips. Height 750 Mm. Present Alongside The Price Proposal The Certificate Of Conformity Of The Quality Management System, Issued By The Assoc. Brazilian Technical Standards Board (Abnt) Whose Certifier Is Included In The Scope To Certify Sgq. The Certificate Must Contain The Inmetro Seal. Chain Of Custody Certificate For Wooden Products (Fsc), Issued By A Nationally Or Internationally Recognized Certifier On Behalf Of The Furniture Manufacturer, In Compliance With Decree No. 7,746/2012, Art. 7, For The Purpose Of Proving Sustainability Guidelines In Contracting . Test Report On Corrosion And Aging Due To Exposure To Salt Mist, Issued By A Laboratory Accredited By Inmetro In Accordance With Abnt Nbr 17088/2023 And Abnt Nbr 8095/2015 (Coated And Uncoated Metallic Material, Corrosion Due To Exposure To Salt Mist And Humid Saturated Atmosphere At Minimum 3504 Hours, Which Contains Welded Union In Industrial Steel Tube) Evaluated According To Nbr 5841/2015 And Nbr Iso 4628:2022, Blistering Degree D0 / T0 And Rusting Degree Ri 0. Seats: Structure In Steel Tube Rectangular Steel 20X40 (Wall 1, Monoblock Type (Single Structure) With Angle-Shaped Cuts Allow The Table To Fit In, Making It Stackable. Welding Of The Metallic Parts Using Proce, Maternity Table Set With Five Seats And A Chair For The Monitor: Table: Structure With Feet In 1 ½ (Wall 1, 50) Steel Tube. In 1/1/4 Steel Tube (Wall 1, 50) To Join The Sides Of The Table. Closing Of The Tops And Shoes With Injected Tips In Orange, Fixed Through A Fitting And Riveted To The Structure Using Aluminum Foam Rivets 4, Stackable Bed: Childrens Bed, Colorful, Non-Toxic, Consisting Of Two (2) Headboards And Two (2) ) Articulating Support Feet To Prevent Bending And Enable Stacking, In Thermoplastic Material Using The Injection Process In The Colors Violet, Lime Green, Orange Or Flag Green. The Feet Follow The Same Design As The Headboards And Are Located In The Central Part With Operation At A 90 (Ninety) Degree Angle, The Fixing System Does Not Allow For Removal For Greater Safety, Headboards And Feet Equipped With Rubber Tips, Four Of Which (4) For Each Headboard And Two (2) At Each Foot, That Is A Total Of Twelve (12). Its Sides Are Made Up Of Two (2) 16X30 Oblong Steel Tubes, 1.90 Mm Thick Each. Stackable Docking System, With A Space Of 5 Cm Between One Screen And Another. Bed Made Of Hollow Fabric With Ventilation System, Antiperspirant, Washable, Antifungus, Anti-Uv And Antioxidant, Made