Tenders Are Invited For Construction Of A Community Center In Skorzów - Repetition

1. The Subject Of The Order Is The Completion Of The Construction Of A Community Center In Skorzów. The Task In Question Will Be Implemented On The Basis Of The Granted Building Permit - Decision No. 337/18 Of September 25, 2018. The Investment In Question Is Located On The Plot No. 419/14 In The Month Skorzów, Precinct 0033, Commune Busko-Zdrój, Poviat Buski, Voivodeship Świętokrzyskie. The Task Is Co-Financed Under The Rural Development Program For 2014-2020 Under The Measure Basic Services And Village Renewal In Rural Areas. 1) Scope Of The Investment: A) The Construction Of The Community Center In Skorzów Began In 2023. The Following Elements Of Construction Works Were Carried Out Within The Facility: - The Axes Of The Buildings Foundations Were Geodetic Marked - The Buildings Foundations Were Constructed According To The Structural Design - Foundation Walls Were Built, Foundation Walls Were Insulated, Foundation Walls Were Backfilled With Soil - Internal Spaces Between The Foundation Walls Were Filled With Sand, Horizontal Sewage Pipes Were Laid Sanitary With Approaches To The Risers, The Sand Base Was Compacted And A Concrete Base Was Made. 10 Cm Of Concrete. The Execution Of The Works In Question Was Documented By The Construction Manager In The Construction Log. Attention!1. For The Construction Of The Facility, 1,584 Pieces (22 Pallets Of 72 Pieces) Of Blocks With A Thickness Of 25 Cm - Thermopor 25 P+W Ceramic Block, Class 15 Leier. This Material Should Be Used To Carry Out Works Related To The Construction Of Structural Walls. 2. The Design Documentation Was Developed In 2018. The Contractor Will Adapt The Elements For The Construction Of Partitions To The Currently Applicable Regulations, Including: Heat Transfer Coefficient - In Accordance With Currently Applicable Standards (E.G. Mineral Wool, Polystyrene, Windows And Doors). General Assumptions Of The Subject Of The Order: 1. Construction Of A Community Center Building With Accompanying Infrastructure, I.E. Internal Water And Sewage, Central Heating, Ventilation And Electrical Installations, As Well As Internal And External Gas Installations - In Accordance With The Provisions Of The Design Documentation. Note! Pvc Window Joinery Should Be Used. Internal Door Joinery - In Accordance With The Information Contained In The Design Documentation And In The List Of Window And Door Joinery As Wooden Panel Doors. External Aluminum Entrance Doors With Glazing. The Colors Of Window And Door Joinery Are Shades Of Gray On Both Sides; 2. Construction Of A Drainless Tank For Liquid Waste With A Capacity Of Up To 10 M3 With A Sanitary Sewage Connection To The Building. Note! The Design Documentation Assumes The Construction Of A Monolithic Tank For Liquid Waste, Poured On Site. The Ordering Party Allows Changing The Structure Of The Designed Tank For Liquid Waste (Sewage) With A Capacity Of 10 M3 From The Prefabricated Septic Tank Poured On Site, Provided That The Parameters Of The Waste Tank Can