Bids Are Invited For Hiring A Company To Carry Out Construction Work On The Municipal Entrance Portico, On Rodovia Mg 454, SN, Bairro Planalto, According To Specifications Contained In The Attached Engineering Documents, In Compliance With The Needs Of The Municipal Department Of Urban Development Of Recreio -Mg.

1.1 Supply And Placement Of Work Sign Made Of Galvanized Sheet 26, Esp. 0.45 Mm, Plotted With Vinyl Adhesive, Affixed With 4.8X40 Mm Rivets, On Metal Structure Of Metalon 20X20 Mm, Special. 1.25 Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats, 2.1 Mechanical Excavation Of Trenches With Depths Greater Than 1.5M And Less Than Or Equal To 3.0M, Including Loading On Truck, Exclusive Transport And Unloading, 2.2 Piping Of The Bottom Of Trenches With Plate, 2.3 Shaping And Shaping Of Board And Batten, Reuse (3X) (Foundation), 2.4 Supply Of Structural Concrete, Machined, With Fck 30 Mpa, Including Placing, Thickening And Finishing (Foundation), 2.5 Concrete Slim For Ballast, Mixture 1:4, 5:4, 5 (In Dry Cement Mass/Medium Sand/Gravel 1) - Manual Preparation. Af_05/2021, 2.6 Compacted Trench Backfill With Vibrating Plate Equipment, 2.7 Ca-50 Steel Cutting And Bending, 6.3 Mm Diameter. Af_06/2022, 2.8 Cutting And Bending Of Ca-50 Steel, Diameter Of 8.0 Mm. Af_06/2022, 2.9 Cutting And Bending Of Ca-50 Steel, Diameter Of 10, 2.10 Cutting And Bending Of Ca-50 Steel, Diameter Of 12.5 Mm. Af_06/2022, 2.11 Cutting And Bending Of Ca-60 Steel, Diameter Of 5, 3.1 Shaping And Shaping Of Board And Batten, Reuse (3X), Exclusive Shoring, 3.2 Supply Of Structural Concrete, 3.3 Cutting And Bending Of Ca-50 Steel , 3.4 Cutting And Bending Of Ca-50 Steel, 3.5 Cutting And Bending Of Ca-50 Steel, 3.6 Cutting And Bending Of Ca-50 Steel, 3.7 Cutting And Bending Of Ca-60 Steel, 4.1 Sealing Masonry With Concrete Block, Esp. 14Cm, With Apparent Finish, Including Mortar For Laying, 4.2 Fence Masonry With Refired Solid Brick, Esp. 10Cm, 4.3 Silicone Resin Based Paint On Concrete Or Exposed Masonry, Two (2) Coats, 5.1 Waterproofing With Mortar Trace 1:3, And 2.50 Cm With Additive, 6.1 50L Aluminum Milk Can, 6.2 Coat From The Municipality, 6.3 Stainless Steel Sign With Letters Of 0.50M, 6.4 Shrub Seedling, Boxwood, H 50 Cm, 6.5 Lattice Metal Structure Painted In Brown Color To Support The Sign