Bids Are Invited For Record Of Prices For Future And Eventual Acquisition Of Furniture And Other Equipment To Meet The Needs Of School Units In The Municipal Education Network And The Municipal Education Department Of Carandaí.

Steel File - Fnde Standardsteel File - Fnde Standard - Ref.: Am1 - Description: The Sliding File In Steel Sheet 26 (Thickness 0.46Mm) In Platinum Color, With Four Drawers And Single Locking, Closing Through A Cylindrical Drum, With Adjustable Sliding Drawers Spaced Every 400Mm. The Drawer Sliding System Will Be Through Metal Bearings On Telescopic Zinc-Plated Steel Rails. The Built-In Handles And The Dimensions Of The Built-In Label Holder Are 75 X 40Mm. It Must Be Treated Against Oxidation With Zinc Phosphate And Painted With Special Paint With Oven Drying; After The Process Described Above, The Product Must Go To A High Temperature Oven To Receive Painting Through The Electrostatic Powder Painting Process, Consolidating The Surface Of The Product With A Minimum Of 50 Microns Of Paint Thickness. The Baseboard Is Made Of Sheet Steel Painted In The Same Platinum Color With Leveling Shoes. Capacity: 35Kg Per Drawer. Dimensions: Height: 105Cm W Width: 47Cm W Depth: 71Cm. Recommendations: For Manufacturing, It Is Essential To Follow The Executive Project, Details And Technical Specifications. All Metallic Parts Must Be Joined Together By Means Of Welding, Creating A Single Structure And Must Receive Anti-Rust Treatment. Eliminate Burrs, Weld Spatter, Grind Joints And Round Sharp Corners. All Units Must Obtain The Manufacturers Quality Control Identification Seal And A Two-Year Warranty Against Manufacturing Defects. Lots Showing Non-Conformities Or Manufacturing Defects Will Be Rejected. Variations In The Specifications May Be Approved To Adapt To The Standards Of Each Manufacturer, As Long As It Represents An Improvement In Quality In Relation To The Original Specifications., Steel Cabinet - 2 Doors/ 4 Shelvessteel Cabinet - 2 Doors/ 4 Shelves - Fnde Am4 Standarddescription Tall Steel Cabinet, Divided Vertically Into Two Compartments By Means Of Dividers With Independent Doors, Equipped With Four Removable And Adjustable Shelves In Each Compartment. Dimensions And Tolerances O Width: 900 Mm +/- 10 Mm; O Depth: 400 Mm +/- 10 Mm; O Height: 1980 Mm +/- 10 Mm; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics The Body, Partitions And Doors In Cold Rolled Steel Sheet - Plate 22 (0.75 Mm). Shelves And Door Reinforcement In Cold Rolled Steel Sheet - Sheet 20 (0.90 Mm). The Base In Cold Rolled Steel Sheet - Plate 18 (1.25 Mm). Door Locking Bars Ø = 1/4 (Minimum). 28 Internal Hinges Not Visible On The Exterior Of The Furniture Made Of Cold-Rolled Steel Sheet - Sheet 14 (1.9 Mm) With A Minimum Of 75 Mm In Height - Three Units Per Door. The Entirely Metal Handle And Canopy, With Cremona System Locking. The Cylindrical Barrel Lock Built Into The Handle With A Minimum Of 4 Pins. Duplicate Keys Attached To Corresponding Door Handles. The Stamped Or Superimposed Label Holder, The Latter Being Exclusively Made Of Chrome-Plated Non-Ferrous Metal Alloy. Painting In Epoxy/Polyester Hybrid Powder Paint, Glossy Electrostatic, Polymerized In An Oven, Minimum Thickness Of 40 Micrometers In Gray Color. Warranty For A Minimum Of Three Years From The Date Of Delivery, Against Manufacturing Defects And Oxidation. All Components Of This