Request For Quotation Purchase Of Building Materials

Primer Is Used To Prepare Structures And Surfaces For Finishing. The Composition Of This Building Material Includes Additives, Solvents, Fillers And A Binding Element. It Evens Out The Surface, Contributing To Further Uniform Coverage. A Primer Is Needed To Improve Adhesion With Putty, Paint Products, And Wallpaper Glue. It Reduces The Consumption Of Finishing Materials, Speeds Up The Painting Process, And Also Increases The Service Life Of Treated Surfaces. The Priming Composition Improves The Resistance Of The Surface To Adverse Effects, Prevents Mold And Rot., Water Emulsion For Exterior Work. Application: For Painting Facades And For Interior Work In Wet Rooms. Characteristics: After Drying, It Forms A Smooth Matte Surface; Whiteness 90%; Has High Water And Weather Resistance; Has Good Adhesion To Concrete, Brick, Plasterboard Plastered Surfaces; Forms A Breathable Coating; Can Be Colored With Coloring Pastes; Light-Resistant (Does Not Yellow During Use).. Consumption: 160-180 G/M², Construction Gypsum Mixture Density – 800–1100 Kg/M³ (For Comparison: The Density Of Cement Plaster Is 1.5–2 Times Higher – 1600–1800 Kg/M³). The Maximum Grain Size Is Up To 1.25 Mm. The Permissible Thickness Of The Layer Is 5–50 Mm Without Reinforcement, In Recesses Up To 70 Mm. The Grade Of Mobility Of The Solution Is Pk3. The Thermal Conductivity Of The Finished Layer Is 0.23–0.3 W/(M×°C). Operating Temperature - From -50 To +70°С Vapor Permeability Of The Finished Layer - 0.11–0.14 Mg/M×H×Pa. The Color Is White.