Tenders Are Invited For Construction Of Sports Fields With Dimensions Of 20 X 40 In Kozielice, Siemczyn And Łozice

The Subject Of The Order Are Construction Works Consisting In The Construction Of 3 Football Pitches In The Following Towns: - Kozielice On Plot No. 363/3 Next To The Primary School, - Łozice On Plot No. 25/18 Next To The Community Center - Siemczyn On Plot No. 7/10 With An Artificial Grass Surface 5 – 6 Cm High, Filled With Quartz Sand And Sbr Or Epdm Granules. The Surface Of The Synthetic Grass Pitch Is 23 M X 43 M, Including A Playing Field Measuring 20 X 40 M. The Pitch Is To Have White Lines Glued In. 10 As Shown In The Drawing. Around The Pitch, An 8X30cm Edge Should Be Made On A Concrete Bench With C12/15 Concrete Support. Goals With Dimensions Of 3X2 M Are Made Of Aluminum Profiles 120 X 100 Mm, Powder-Coated In White. Goals Mounted In Sleeves. Base: - Native Soil - Separation Geotextile 200 G/M², Tensile Strength Along And Across The Strip Min. 16 Kn/M - Compacted Sand Ballast - 100 Mm - Supporting Layer Stone Aggregate Fraction 5 / 32 - 120 Mm - Supporting Layer Stone Aggregate Fraction 0 / 32 - 80 Mm - Leveling Layer Stone Aggregate Fraction 0/5 - 30 Mm - The Surface Is Designed Synthetic Grass With A Height Of Min. 60 Mm With The Minimum Technical Parameters Specified Below, Covered With Sand And Recycled Black Epdm Granules. Minimum Requirements For A Synthetic Grass Surface For A Football Pitch Fiber Type: 2 Types Of Fibers In One Bunch, 100% Monofilament; (Two Different Fiber Colors) - Fiber Height: Min. 60 Mm- Thickness Of Monofilament Fiber: Min. 440 And 490 Microns - Dtex: Min. 15,600 Dtex- Fiber Weight: Min. 2,100 Gr/M2 - Total Weight: Min. 3,000 Gr/M2 - Number Of Bunches: Min. 9,450 /M2- Tensile Strength Of The Bundle After Aging: Min. 52 N- Bonding Strength After Aging Min. 170 N/100 Mm- Water Permeability/Through The System Min. 3,000 Mm/H - Latex Primer - Surface Filling: Quartz Sand And Recycled Epdm Rubber Granulate. The Ordering Party Will Call On The Contractor Whose Offer Was Rated The Highest To Confirm That It Meets The Ordering Partys Requirements Regarding The Surface And Provide The Following Documents: A) Test Report Carried Out By A Specialist Laboratory Recommended By Fifa (E.G. Labosport Or Isa-Sport Or Sports Labs Ltd), Regarding The Offered Synthetic Grass Surface System With Epdm Filling, Confirming Compliance Of Its Parameters With The Fifa Quality Concept For Football Turf (2015 Edition) For A Level Of Min. Quality And Confirming That All Technical Parameters Are No Worse Than Those Required (Available At Www.Fifa.Com);B) Testing For Compliance With The En 15330-1:2013 Standard To Confirm Other Parameters Apart From The Minimum Requirements For The Synthetic Grass Surface System With Infill Epdm;C) Pzh Certificate For An Artificial Grass Surface;D) Pzh Certificate For An Epdm Filling;E) Technical Card Confirmed By The Manufacturer, Containing Detailed Characteristics And Technical Parameters Of The Artificial Grass Surface;F) Authorization Of The Synthetic Grass Manufacturer, Issued To The Contractor For