Tenders Are Invited For Renovation Of Part Of The Basement Rooms Of Building No. 1 In The Military Complex At Ul. Warszawska 10 In Bydgoszcz

Scope Of Works:- General Construction Works:• Tearing Up Plastic Floors• Carving Out Wooden Doors From The Wall• Dismantling Floors Made Of Tiles With Cement Mortar• Dismantling Wall Coverings Made Of Tiles• Demolition Of Concrete Floors• Tearing Off Cement And Terrazzo Floors Together With Plinths• Digging Holes In Brick Walls• Reflecting Plasters Made Of Cement-Lime Mortar• Scraping And Washing Off Old Paint• Partition Walls Made Of 12 Cm Thick Aerated Concrete Tiles• Completing The Walls And Filling In Holes In Brick Walls• Priming Vertical And Horizontal Surfaces With Primers• Plastering Renovation Works By Hand• Double Painting Of Internal Plasters With Emulsion Paint And Wiping The Plasters• Double-Layer Gypsum Plaster On Walls And Ceilings• Double Painting Of Smooth Internal Plasters With Washable Paint• Horizontal Insulation Made Of Construction Foil• Concrete Bases Made Of C20/25 Flooring Concrete With The Addition Of Polymer Fibers• Tile Floors Made Of Artificial Stones• Facing Walls With Tiles• Internal Steel Doors And Fire-Resistant Doors• Painting Steel Pipes With Oil Topcoat• One-Time Painting Of Radiator Radiators• Construction Of An Epoxy Resin Floor• Removal Of Rubble And Its Disposalthe Scope Of All Works And Requirements Is Described In Detail In Annex No. 4 To Swz (Stwiorb Of The Construction Industry) And Annex No. 7 To Swz (Construction Bill Of Quantities). - Electrical Works:• Disassembly Of The Fuse Board• Disassembly Of Plastic Boxes• Disassembly Of Cable Lines• Disassembly Of Cast Iron Incandescent Fixtures• Disassembly Of Fluorescent Lamp Fixtures With A Plastic Louvre• Disassembly Of Plug-In And Surface-Mounted Sockets• Disassembly Of Connectors In A Metal Casing• Mechanical Punching Of Holes• Installation Of Boxes And Box Switchboards With Equipment• Installation Of Winidur Pipes Laid N.T. On Ready-Made Holders• Cable Wires With A Polyvinyl Coating Laid In Ready-Made Trays And On Ladders Without Fastening And Pulled Into Pipes• Installation Of Surface-Mounted Plastic Taps On A Ready-Made Surface• Installation Of Surface-Mounted 2-Pole Plug Sockets With Grounding, Screwed And Installation Connectors• Installation Of Flush-Mounted Plug Sockets On A Ready-Made Substrate• Installation Of Emergency Lighting Fixtures With A Pictogram On A Ready-Made Substrate• Installation Of Emergency Led Luminaires With An Inverter, 4300 Lm, Warm, On A Ready-Made Substrate• Installation Of 4300 Lm Led Luminaires, Warm, On A Ready-Made Substrate• Installation Of Luminaires On A Ready-Made Substrate Ceiling Ceiling Lamp Ip 44 Led 1200Lm• Measurement Of Insulation Resistance Of Electrical Installations• Checking Automatic Power Off• Measurement Of Light Intensity• Installation With Connection Of A Manual Fire Alarmthe Scope Of All Works And Requirements Is Described In Detail In Annex No. 5 To Swz (Stwiorb Of The Electrical Industry) And Annex No. 8 To Swz (Electrical Bill Of Quantities).- Installation Works:• Disassembly Of Galvanized Steel