Bids Are Invited For Furniture And School Equipment.

Stereo System With Usb Input, Mp4, Compatibilities: Smartphones, Tvs And Smarttv, Notebook, Computer, Tablets, Mp3, Connections: Bluetooth 4.2, Usb, Sd Card, Aux And Fm, Response Frequency: 20 - 20000Hz Impedance: 30 Ohmz, Power: 110V/ 220V, Indicator Display, Power 1000W, 20W Rms, , Monoblock Rectangular Bench - B1 (Proinfancia) - Description: Monoblock Rectangular Bench, With Rounded Edges, Measuring 1.80 X 0.40, With Rectangular Steel Structures 50X30mm Wall 1, 2. The Top Is Made Of 15 Mm Mdf With 30 Mm Re-Thickening, Covered On Its Upper Face In Pos Formable Melamine Laminate 0.6 Mm Thick In Ibiza Color (Reference L 156), Textured Surface Finish And Ribbon Header. White Pvc Board. Lower Face Finish In Glossy White Melamine Laminate. The Top Is Fixed Using 2 1 X 3/16 Self-Tapping Screws. The Steel Structure With Electrostatic Painting Of Epoxy Powder Paint, In Matte White Color, Polymerized In An Oven. Finishing Tips In White Polypropylene, Fixed To The Structure Using A Fitting. ..., Crib - Bc1 - Description The Childrens Crib In Mdf With White Railings, Non-Foldable, With Castors. Dimensions And Tolerances The Length: 1200 Mm +/- 10 Mm, The Width: 670 Mm +/- 10 Mm, The Height Of The Headboards Considering The Tubular Structure: 900 Mm (+Or- 10 Mm) Without Considering The Castor. Features The Doinometer Seal, The Inverted U-Shaped Metal Structure For Supporting The Headboards And Side Rails, Made Of Carbon Steel Tube, Circular Section Of 1 1/4, In Plate 16 (1.5Mm), With Curves In The Upper Corners. Upper Horizontal Bars, Far From The Headboards, So That They Serve As Handles For Carrying The Cot. Tube Bend Radius Of 100Mm (+Or- 5Mm) Considering The Tube Axis. The Structure Of The Platform Is Made Of Carbon Steel Tubes, Rectangular Section With Dimensions Of 40 X 20 Mm, 5 Mm). The Base Of The Crib (Board) Is Made Of Solid Mdp Sheet, 18Mm Thick, Covered On Both Sides In Low-Pressure Melamine Laminate (Bp) In White. The ..., Foldable Childrens High Chair (C1) High Chair With Removable Tray. Dimensions And Tolerances O Height: 1050 Mm +/- 50 Mm, O Width: 560 Mm +/- 50 Mm, O Depth: 680 Mm +/- 50 Mm, O Side Protection: Minimum 140 Mm, Measured From The Top Of The Protection Side To The Surface Of The Seat, The Height Of The Backrest: Minimum 250 Mm, Measured In The Vertical Position, The Angle Of The Backrest: Minimum 60° In Relation To The Horizontal (If Smaller, The Minimum Length Of The Backrest Must Be 400 Mm), The Front Edge Of The Seat: Minimum Radius Of 5 Mm. Characteristics It Supports Up To 15 Kg, The Folding Chair, With A Tubular Structure Of Circular Section In Carbon Steel, The Seat And Back Padded With Foam Covered With Delona Vinyl Laminated With Fabric, 80 Arms Or A Device For Protection Late Ral, The Tray In (Pp) Injected Polypropylene, In White Color, Removable Or Hinged With Rounded Edges On The Sides To Retain Liquids, The Footrest In (Pp) Injected Polypropylene, Removable Or Hinged, The Non-Slip Shoes With Parts In Contact With The Rubberized Floor. Suspender Belt With A Minimum Width Of 25Mm, Equipped With Retention Points Between The Legs, Lap Straps And Shoulder Straps. The System For Attaching The Belt To The Chair Must Provide Safety Against Falls And Ensure The Childs Stability. The Painting Of The Elements Me