Tenders Are Invited For Construction Work – New Building Sag - Mobile Partition Walls

Construction Work – New Building Sag - Mobile Partition Walls. The Subject Of The Tender Is Mobile Partition Walls: Partition Wall Consisting Of Individual Elements That Are Pushed Together To Form A Solid Wall, Elements Approx. 100 Mm Thick, With A Surrounding Welded Steel Frame Construction; Paneling With Approx. 16 Mm Quality Chipboard According To Din 68763 V20, Cover Panels Applied Freely Swinging And Individually Replaceable. Elements With Upper And Lower Aluminum Pressure Bars, Black Anodized With Special Seals. Electric Actuation Of All Pressure Bars Via Plug-In Control Element. Contact Pressure According To The System Offered To Match The Required Sound Insulation, Proof Of Stability Based On Din 4103. Element Connection With Aluminum Groove And Tongue Profiles, Anodized In Natural Color, According To System Manufacturers Instructions For Element Coupling And Vertical Sealing. Side Connections To Match The Partition Wall Construction. Upper Running Rail In Steel Or Aluminum According To The System Offered, With Roller Carriage. Special Roller Carriages Must Be Used At Crossing Points To Guarantee Perfect Running. Running Rail With The Possibility Of Supporting Drywall Ceilings. Transverse Sliding Discs Are Not Permitted. Without Floor Track. Each Element Has A Functional Height Adjustment Mechanism To Enable The Elements To Be Readjusted At Any Time. Surfaces Of The Elements As Hpl-Coated Mdf Boards, Mdf Board Thickness Approx. 16Mm Per Side, Hpl Coating Thickness At Least 0.8Mm Or According To System Manufacturers Information. Telescopic Elements:1. Wall Element Designed As A Telescopic Element, Operation From The Surface, Case Lift Approx. 100 Mm. Extensible Case Inside Or Outside According To The System Offered, Surface Like The Partition. The Sound Insulation Of The Movable Partition Must Be Tested In Accordance With Din En 20 140-3 And Proven By Appropriate Test Certificates. Sound Insulation: Rw, Greater Than/Equal To 57 Db The Parking Position Of The Elements Must Be Taken Into Account On One Side Of The Room According To The Implementation Planning. Connection/Interface Description: The Circuit Supply Cable Is Brought Up To The Partition Wall On Site. This Must Be Connected To The Control Of The Partition Wall System By The Contractor (Partition) After Consultation With The Electrical Engineering Contractor. After Approval By The An (Partition), The Voltage Is Switched On By The An Electrical Engineering. Contact Switch Partition Open / Closed Two Limit Switches With Changeover Contacts Must Be Installed Ready For Operation For Each End Position (Partition Open / Closed). The Limit Switches Are For Low Voltages Up To 60V/0.5A And Are Used By The Electrical Engineering And Building Automation Trades. The Limit Switches Must Be Mounted In A Freely Accessible Manner And Have A Housing With Cable Entry For Cables Up To 3X1.5Mm². The Function Of The Switches Must Be Checked Before Handing Over To The Third-Party Trade. The Details Of The Service/The Required Metal Construction Work Can Be Found In The List Of Services.